This slim single channel Sunricher RF to Phase Cut AC switch will enable you to power on or off your AC mains powered LED products from a compatible Sunricher RF handset or wall panel.
Note: This single channel switch is not suitable for dimming and is designed for professional installation purposes only.  It requires a 100v - 240v AC power source and must be to a compatible RF transmitter (available separately).

This slim single channel Sunricher RF to Phase Cut AC Dimmer will enable you to power on or off and dim your AC mains powered LED products from a compatible Sunricher RF handset or wall panel.
Note: This single channel dimmer is designed for professional installation purposes only.  It requires a 100v - 240v AC power source and must be to a compatible RF transmitter (available separately).

As part of our Sunricher range of LED control products, this high quality RF to DALI single channel Group and Scene Controller is powered from the DALI bus so there is no need for a separate driver.  The unit is compatible with all DALI lighting control system and compatible with many Sunricher RF single channel remote controllers.

From our Sunricher range of DALI products this feature rich RF to DALI Group & Scene Controller receives an RF signal and outputs a DALI signal to the DALI line.  It is compatible with DALI DT8 protocols for RGBW Colour changing from one DALI address and it can be used with all compatible DALI masters that support DT8 commands.

This RF to DALI DT8 Group & Scene controller for tunable white LED Products receives an RF signal and outputs it to a DALI signal to the DALI line.  It is DALI bus powered and complies to DALI DT8 standard protocols IEC 62386-102, IEC 62386-207, IEC 62386-209.  The unit is compatible with all DALI lighting control system and with many Sunricher RF duel channel CCT remote controllers.

Z-Wave is a quality home automation system that links various Z-Wave products or "nodes" together to switch and control Z-Wave licenced devices that are connected to its network.

This high quality Sunricher curtain motor controller can be incorporated into such a network and will connect to any other licenced Z-Wave product as part of the Z-Wave network of devices to switch and control your curtins or blinds with accurate positioning.  The controller works with resistive, inductive and capacitive loads and as such it can also be used as a lighting controller.

This slim single channel Sunricher RF to TRIAC AC switch will enable you to power on or off your AC mains powered LED products from a compatible Sunricher RF handset or wall panel.
Note: This single channel switch is not suitable for dimming and is designed for professional installation purposes only.  It requires a 100v - 240v AC power source and must be to a compatible RF transmitter (available separately).

This slim single channel Sunricher RF to TRIAC AC Dimmer will enables you to power on or off and dim your AC mains powered LED products from a compatible Sunricher RF handset or wall panel (available separately).  The unit supports both leading and trailing edge products.

As part of our Sunricher range of LED control products, this RF to DMX master controller enables control of LED products of up to four channels by DMX using the SunRicher RF transmitters.  The receiver can be paired to the Sunricher range of hand held or wall mounted controllers, enabling control up to 20m away.

As part of our Sunricher range of LED control products, this WiFi to DMX master controller enables control of LED products of up to four channels by DMX512 through your WiFi system using the Easy Home App available for IOS and Android devices.  This unit must be connected to a DMX512 decoder (available from LED Technologies) in order to control your lighting products.

As part of our Sunricher range of LED control products, this RF to 0-10v Receiver / Converter enables you to control your 0-10v products by the Sunricher RF remote control handsets or RF wall panels.  You can pair upp to 8 x RF transmitter to one converter.

This three channel RF receiver can be paired to the SR-2839DIM, the SR2839CCT or the SR-2839 RGB controller hand sets to extend the system as required.  Ideal for both domestic and commercial applications where larger installations required more LED lighting to be controlled from the same hand set.

This four channel RF receiver is designed to work with the SR 2819 and SR-2839W hand sets.  Once paired to the handset you can control your RGB or RGBW lighting products as required.  It is possible to pair up to 8 x handsets to one receiver.  Ideal for both domestic and commercial applications for easy control of your colour changing LED products.

As part of our Sunricher range of LED control products, this single channel receiver is designed to control a single colour LED product.  These receivers can be paired to the Sunricher single channel hand held or wall mounted controllers.  Each receiver can be paired with up to eight transmitters, enabling multiple control up to 20m away.     

As part of our Sunricher range of LED control products, this RF receiver is designed to control LED products of up to four channels.  The receiver can be paired to the Sunricher range of hand held or wall mounted controllers and each receiver can be paired with up to eight transmitters, enabling multiple control up to 20m away.     

This Sunricher RF and WiFi receiver will control LED products of up to four channels by RF or WiFi remote control   The receiver can be paired to a Sunricher hand held or wall mounted controller up to four channels or via your home WiFi through the Sunricher WiFi controller or with the free Easy Home App available on IOS or Android.

As part of our SunRicher range of LED control products, this IP68 rated (waterproof) receiver is designed to control LED products up to four channels.  The receiver can be paired to the SunRicher hand held or wall mounted controllers and each receiver can be paired with up to eight transmitters, enabling multiple control up to 20m away.     

As part of our Sunricher range of LED control products, this RF receiver is designed to control LED products of up to five channels.  The receiver can be paired to the Sunricher range of hand held or wall mounted controllers and each receiver can be paired with up to eight transmitters, enabling multiple control up to 20m away.     

As part of our Sunricher range of LED control products, this RF Slim Design LED Driver is designed to control single or Dual channel (CCT) LED products.  The controller / driver can be paired to the Sunricher range of hand held or wall mounted controllers and each unit can be paired with up to eight transmitters enabling multiple control up to 20m away.   Easy to use, simply connect your 100v to 240v AC mains supply and your LED product, then pair the Driver to a compatible Sunricher RF handset or wall panel.    

As part of our Sunricher range of LED control products, this RF 24v 75w Slim Design LED Driver is designed to control single or Dual channel (CCT) LED products.  The controller / driver can be paired to the Sunricher range of hand held or wall mounted controllers and each unit can be paired with up to eight transmitters enabling multiple control up to 20m away.   Easy to use, simply connect your 100v to 240v AC mains supply and your LED product, then pair the Driver to a compatible Sunricher RF handset or wall panel.    

This Sunricher RF 24v, 96w RF Driver will power and control your 24v LED products by wireless remote control, it is compatible with a variety of Sunricher remote control handsets and wall panels and works in 1, 2, 3 or 4 channel modes.  This is a high quality unit designed for installation purposes and has an integral 96w Constant Voltage 24v Driver.

This Sunricher RF 24v, 200w RF Driver will power and control your 24v LED products by wireless remote control, it is compatible with a variety of Sunricher remote control handsets and wall panels and works in 1, 2, 3 or 4 channel modes.  This is a high quality unit designed for installation purposes and has an integral 200w Constant Voltage 24v Driver.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher single colour constant voltage controller can be incorporated into a ZIGBEE network and will connect to any other ZIGBEE product as part of a network of devices to control your single colour adjustable LED products.  This unit can also pair directly with the Sunricher Remote control handset SRZG2819SDIM without the need for a gateway hub.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher dual colour constant voltage controller can be incorporated into a ZIGBEE network and will connect to any other ZIGBEE product as part of a network of devices to control your colour temperature adjustable LED products.  This unit can also pair directly with the Sunricher Remote control handset SRZG2819SCCT without the need for a gateway hub.

As part of our SunRicher range of LED control products, this high quality three channel RF Zigbee receiver can be paired to an existing home or office automation system that uses the latest Zigbee 3 protocols.  The unit supports Touchlink commissioning to enable easy programming and it is compatible with universal RGB Zigbee remote controllers.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher RGBW colour changing constant voltage controller can be incorporated into a ZIGBEE network and will connect to any other ZIGBEE product as part of a network of devices to control your LED products.  Note: With ZIGBEE 3.0, the W channel is controller by the CCT Command.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher RGB & CCT colour changing constant voltage controller can be incorporated into a ZIGBEE network and will connect to any other ZIGBEE product as part of a network of devices to control your RGB and colour temperature adjustable LED products.

Z-Wave is a quality home automation system that links various Z-Wave products or "nodes" together to switch and control Z-Wave licenced devices that are connected to its network.

This high quality Sunricher Single channel controller can control upt to four two sets of single colour LED products together and can be be incorporated into a Z-wave network, it will connect to any other licenced Z-Wave product as part of the Z-Wave network of devices to switch and control the brightness of your single colour LED products.

Z-Wave is a quality home automation system that links various Z-Wave products or "nodes" together to switch and control Z-Wave licenced devices that are connected to its network.

This high quality Sunricher dual channel controller can control two sets of CCT adjustable LED products together and can be be incorporated into a Z-wave network, it will connect to any other licenced Z-Wave product as part of the Z-Wave network of devices to switch and control the brightness and colour temperature of your Dual colour LED products.