integrating a new protocol with a 0-10V converter
Integrate your 0-10V compatible lighting with your current control system with our range of 0-10V converters.
Our range of converters accept inputs including DALI and RF which are then converted and relayed as a 0-10V signal.
The 0-10V compatible lighting fixture will then convert the signal into PWM to adjust the light output.
These converters are easy to install and often cost-saving as current control systems do not need to be replaced.
Sunricher RF to 0-10V Converter / PWM ControllerProduct Code: SR1009010VPWM
As part of our Sunricher range of LED control products, this RF to 0-10v Receiver / Converter enables you to control your 0-10v products by the Sunricher RF remote control handsets or RF wall panels. You can pair upp to 8 x RF transmitter to one converter.
Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 100v - 240v AC 100v - 240v AC RF CRI >80
Sunricher DALI to 0-10V ConverterProduct Code: SR230301VPWM
This DALI to 0-10v Signal converter will convert your DALI signal into a 0-10v signal that will control your existing 0-10v dimmable drivers. This is especially useful when integrating your existing 0-10v products into a DALI control system. It is ideal both commercial and domestic applications where a DALI system is used.
Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 100v - 240v AC 100v - 240v AC DALI protocols CRI >80