AMPDMXXL MiBoxer IP66 DMX Signal Amplifier

This AMPDMXXL DMX Data Amplifier is designed to work with the following products from MI-Light / Mi-Boxer:

• UW409AXL
• UG409AXL
• UG405AXL
• SP403AXL

When connecting long lengths of DMX (Digital Multiplex) cable between devices, or for projects where there are a lot of units to link together you will need to boost the DMX signal.

This compact DMX amplifier from our Mi-Boxer range of products can be inserted into the DMX line. This will effectively boost the DMX signal so that it will carry over a longer distance. This will also enable more products that work off the DMX protocol to be controlled.

The unit is rated IP66, allowing it to be used for projects with both indoor and outdoor light fixtures.

The unit is supplied with integrated special 5-pin connectors that match the connectors supplied on the products it is connected to.

Note: When long runs of DMX cable are required over a larger installation, it is advisable to attach a DMX terminator plug on the DMX output side of the last unit in the chain. Doing this will help to stop bounce back and other spurious flickering on the lighting products.

If a DMX terminator plug is unavailable, then a 120 Ohm, 0.5W resistor can be connected between the + & - terminals on the last unit.

For more information on this and any of our professional lighting and control products please contact our technical sales team by phone, email, or live chat via our website.

Quick Specs

• Guarantee Period5 Years
• IP RatingIP66 Splashproof
• Input SignalDMX512