This high-quality 9 Watts In Ground LED Light is capable of producing millions of colour combinations. With the addition of white LEDs, you can adjust the colour temperature from Warm White (2700K) to Cool White (6500K).
This long-life underground LED light has an impressive IP rating of IP68. This means the fixture is suitable for mounting into the ground. The LED light can also withstand dust, dirt and sand.
The LED light is designed to be mounted in the floor of your installation. With a strong, silver bezel and thick lens, they can be walked over without damaging them. It is also suitable for being a drive over light.
The In Ground garden light is supplied with a mounting sleeve that should be sunk into the ground and fixed into place. The light body is then slid into the sleeve and screwed into place allowing for easy removal for maintenance.
Using a suitable 3 core cable, up to 50 SYSRD1 lights can be linked together from a single SYST1 controller powered by a suitable 24v driver for the number of lights you want to link together.
Controlling LED In Ground Lights
Various wireless control options are available including RF handsets and wall panels that will pair directly to the SYST1 receiver. In addition to being able to pair with the compatible Mi-Light controllers, the Host Controller / Receiver can control your SYS lighting from a smartphone application or with voice control through your smart speakers. (Additional hub required for these features).
Control this outdoor recessed ground light with various colour changing programs with adjustable speed and light modes are available to give off stunning light effects such as:
- Colour cycles
- Colour pulsing
- Colour fading
Fully control over millions of colour changing LED combinations. Boasting adjustable colour temperature, colour saturation and of course, the lights can be dimmed as required. Simply press the sliders/buttons on your controller to take control.
This dimmable LED light is a perfect energy efficient addition to your outdoor lighting systems. The LED lighting fixture can be controlled from up to 50 meters away. This ground light is perfect for any installation that requires recessed lighting, including:
- Recessed Deck Lighting
- Garden Lighting
- Driveway Lighting
- Decorative lighting
- And many more!
Note: A line of sight is not necessary between the controller and LED light. However, walls or other obstructions can reduce the range.
To power, your LED light, a low voltage 24V DC (Direct Current) supply to each light is required. There are no control cables required for this In Ground LED light as it is controlled wirelessly through an RF controller.
Note: If more lights are required or your cable length is more than 300m, you will need an SYST2 signal amplifier and an additional 24v driver to power the extra lights.
The ground lights are supplied individually and will prove to be the perfect light source for your lighting project. Products such as the RF handset and RF Gateway are purchased separately.
