We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.

RF LED CONTROL Systems
RF (Radio Frequency) remote control is a wireless control protocol that communicates using radio waves. RF controllers will work at a maximum distance of 20 metres making them ideal for a wide range of projects. With a simplistic and wireless setup RF is often a first choice for many lighting projects.
An LED receiver is able to dim and colour change lighting by converting radio signals transmitted by a controller. A receiver controls lighting by adjusting the PWM frequency of each channel based on the RF signal received. As a company we keep stock of RF LED control products for both single colour and RGB LED Strip
As the protocol uses radio waves it does not need line of sight for separate controllers to communicate. This is useful when the power supply and controller need to be hidden out of sight for a clean installation.
With a range of wall panels, handsets and receivers in stock we have controllers to suit each and every install. Shop our selection today and find the right controller for your professional lighting project.
-
Sunricher RF Four Channel 24v 100W Constant Voltage LED DriverProduct Code: SRP100924100CVF
This Sunricher RF 24v, 100w RF Driver will power and control your 24v LED products by wireless remote control, it is compatible with a variety of Sunricher remote control handsets and wall panels and works in 1, 2, 3 or 4 channel modes. This is a high quality unit designed for installation purposes and has an integral 96w Constant Voltage 24v Driver.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity CRI Rating (greater than) Brushed Aluminium IP20 Non-Waterproof 100w 100v - 240v AC 24v DC RF CRI >80 -
Sunricher RF Phase Cut & Push AC Dimmer (SR2501 Series Remotes)Product Code: SR2501SACHP
This slim single channel Sunricher RF to Phase Cut AC Dimmer will enable you to power on /off and dim your AC mains powered LED products from a compatible Sunricher SR2501 Series RF handset or wall panel.
Note: This single channel dimmer is designed for professional installation purposes only. It requires a 100v - 240v AC power source and must be paired to a compatible RF transmitter (available separately).Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 100v - 240v AC 100v - 240v AC RF CRI >80 -
Sunricher RF 1 x Zone RGB RF Wall Panel White (Battery powered)Product Code: SR2836RGBWHITE
This stylish RF RGB wall panel is ideal for installations where it is not possible to run cables from the wall panel to the controller or provide a power source for the wall panel. Supplied with a long-life button battery the wall panel works wirelessly with compatible Sunricher SR1009 series RGB receivers.
Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 36v DC Battery Powered RF CRI >80 -
Sunricher RF 1 x Zone RGB RF Wall Panel Black (Battery powered)Product Code: SR2836RGBBLACK
This stylish RF RGB wall panel is ideal for installations where it is not possible to run cables from the wall panel to the controller or provide a power source for the wall panel. Supplied with a long-life button battery the wall panel works wirelessly with compatible Sunricher SR1009 series RGB receivers.
Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) Black IP20 Non-Waterproof 36v DC Battery Powered RF CRI >80 -
Sunricher RF Constant Current 50w Dual Channel LED DriverProduct Code: SRP100950CCT
This high quality, remote controlled, constant current two channel LED driver, is an ideal product to switch and control your constant current, colour temperature adjustable LED products up to a maximum load of 50w. When paired to a compatible Sunricher RF dual colour handset or wall panel, all the associated features can be used to control the driver.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity White IP20 Non-Waterproof 50w 200 - 240v AC 8-48v RF & WiFi -
Sunricher RF 50w Constant Current RF LED DriverProduct Code: SRP100950CC
This high quality, remote controlled, constant current single channel LED driver is an ideal product to switch and dim your constant current LED products up to a maximum load of 50w. When paired to a compatible Sunricher RF single colour handset or wall panel, all the associated features can be used to control the driver.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity White IP20 Non-Waterproof 50w 200 - 240v AC 8-48v RF & WiFi -
Sunricher RF High Voltage RGB Receiver / ControllerProduct Code: SR1009HT
This compact high voltage RF controller enables full control over your mains powered RGB LED strip lights by remote control. When paired to a compatible Sunricher RF handset or wall panel, all the associated features can be used to control the LED strip.
Colour IP Rating Input Voltage Output Voltage Connectivity White IP20 Non-Waterproof 100v - 240v AC 100v - 240v AC RF & WiFi -
Sunricher RF RGBW 4 x Scene RF Wall Panel Black (Mains voltage)Product Code: SR2820ACBLACK
From the Sunricher range of RGBW controllers this wall mounted, single zone RF remote control transmitter can store up to four programmable scenes. Simply connect to a 100v to 240v AC supply and pair with a Sunricher four channel receiver for control over your quad colour LED Lighting. This product is ideal for domestic and commercial applications.
Colour Input Voltage Connectivity CRI Rating (greater than) Black 100v - 240v AC RF CRI >80 -
Sunricher RF 5 Channel RGB+CCT Receiver / ControllerProduct Code: SR1009EA5C
As part of our Sunricher range of LED control products, this RF receiver is designed to control LED products of up to five channels. The receiver can be paired to the Sunricher range of hand held or wall mounted controllers and each receiver can be paired with up to eight transmitters, enabling multiple control up to 20m away.
Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 12v / 24v / 36v DC 12v / 24v / 36v DC RF CRI >80 -
Sunricher RF Four Channel (RGBW) LED RemoteProduct Code: SR2839W
This Sunricher RF four channel (RGBW) remote control handset is designed to work with the SR1029W receiver. This is a compact RF handset has many professional features usually only found in more advanced handsets.
Additional receivers can be added to extend the system as required.
Colour IP Rating Input Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof Battery Powered RF CRI >80 -
Sunricher DMX 1 x Zone RGBW RF / DMX Wall Panel Black (Low voltage)Product Code: SR2811DMXRFBLK
From the Sunricher range of RGBW controllers this low voltage, single zone, DMX & RF wall panel will control your LED lighting using DMX512 protocols. This wall panel can also be paired to the SR2811RF Sunricher RF handset for remote control operation of your quad colour lighting products.
The wall panel features a touch sensitive black glass front panel.Colour IP Rating Input Voltage Connectivity CRI Rating (greater than) Black IP20 Non-Waterproof 12v / 24v DC DMX 512 protocols CRI >80 -
Sunricher RF RGBW LED Remote for use with SR2811 DMX & RF Wall PanelsProduct Code: SR2811RF
This compact RGBW RF handset is for use with the SR2811 DMX + RF wall panels only. The handset allows remote control of your DMX wall panel from up to 20m away and with a handy magnetic wall bracket it can be fixed almost anywhere to suit.
Colour IP Rating Input Voltage Connectivity CRI Rating (greater than) Black IP20 Non-Waterproof Battery Powered RF CRI >80 -
Sunricher DMX & RF 1 x Zone RGBW Wall Panel White (Low voltage)Product Code: SR2811DMXRFWH
From the Sunricher range of RGBW controllers this low voltage, single zone, DMX & RF wall panel will control your LED lighting using DMX512 protocols. This wall panel can also be paired to the SR2811RF Sunricher RF handset for remote control operation of your quad colour lighting products.
The wall panel features a touch sensitive white glass front panel.Colour IP Rating Input Voltage Connectivity CRI Rating (greater than) Black IP20 Non-Waterproof 12v / 24v DC DMX 512 protocols CRI >80 -
Sunricher RF Single Colour Push Switch RF Wall Panel White (Battery powered)Product Code: SR2833K1
From the Sunricher range of controllers this wall mounted, push switch RF remote control wall panel can switch and dim your single colour LED product. It is fitted with a long life battery so requires no external power supply, simply pair with a compatible Sunricher receiver and you are ready to go. Ideal for both domestic and commercial applications.
Colour IP Rating Input Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof Battery Powered RF CRI >80 -
Sunricher RF to 0-10V Converter / PWM ControllerProduct Code: SR1009010VPWM
As part of our Sunricher range of LED control products, this RF to 0-10v Receiver / Converter enables you to control your 0-10v products by the Sunricher RF remote control handsets or RF wall panels. You can pair upp to 8 x RF transmitter to one converter.
Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 100v - 240v AC 100v - 240v AC RF CRI >80 -
Sunricher AC Phase -Cut Dimmer RF Wall Panel White (Mains Voltage)Product Code: SR2400TACRFDesigned to work as a stand alone dimmer this wall panel is suitable for both mains powered LED and incandescent lighting products. Supporting both leading and trailing edge dimming this innovative wall panel can also be paired to a compatible Sunricher RF handset for remote control of your LED lighting.
Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 100v - 240v AC 100v - 240v AC RF CRI >80
Using RF LED control at home
When installing LED strip lighting and similar low voltage products different control protocols can be used, each suited to different projects.
LED lighting can be controlled using a number of different control protocols each one suited to different installations. Large scale projects often use hardwired protocols like DMX and DALI to centralise control through a system.
Due to their simplicity wireless protocols are used frequently in residential installations. With an operating of up to 20 metres, RF LED control is perfect for home lighting control. Unlike hardwired systems, RF doesn’t need a connection between controllers and instead uses radio waves to communicate.
The system can be easily set up by simply pairing the remote or wall panel to the LED receiver. When using zonal controllers these receivers can be programmed both together and separately for flexible control.
As RF works without a line of sight, receivers can be hidden away to make for a clean and tidy install. RF is compatible with both single colour and colour changing products including CT, RGB and RGBW LEDs. RF is a cost effective and easy to use protocol and is often a first choice for residential lighting control.