Receivers

This slim single channel Sunricher RF to Phase Cut AC Dimmer will enable you to power on /off and dim your AC mains powered LED products from a compatible Sunricher SR2501 Series RF handset or wall panel.
Note: This single channel dimmer is designed for professional installation purposes only. It requires a 100v - 240v AC power source and must be paired to a compatible RF transmitter (available separately).

This compact high voltage RF controller enables full control over your mains powered RGB LED strip lights by remote control. When paired to a compatible Sunricher RF handset or wall panel, all the associated features can be used to control the LED strip.

As part of our Sunricher range of LED control products, this RF receiver is designed to control LED products of up to five channels.  The receiver can be paired to the Sunricher range of hand held or wall mounted controllers and each receiver can be paired with up to eight transmitters, enabling multiple control up to 20m away.     

As part of our Sunricher range of LED control products, this RF to 0-10v Receiver / Converter enables you to control your 0-10v products by the Sunricher RF remote control handsets or RF wall panels.  You can pair upp to 8 x RF transmitter to one converter.

• SPI signal output for control of RGB/RGBW pixel lights • DMX512 controllable and RF/WiFi remote controllable • Capable of addressing up to 1020 pixels • The built-in, back-lit OLED panel allows for easy configuration of most settings • Four push buttons available for control of the OLED functions • Supports 38 types of driving IC • RGB/RGBW colour order configurable • 512 DMX decoding channels • Support max. 3060 output channels configurable • 35 built-in sequencing, chasing, changing and static colours under RF mode • Compatible with a variety of RGB/RGBW RF remotes • Works with PC interface DMX consoles and sequencing software

This slim single channel Sunricher RF to Phase Cut AC Dimmer will enable you to power on or off and dim your AC mains powered LED products from a compatible Sunricher RF handset or wall panel.
Note: This single channel dimmer is designed for professional installation purposes only.  It requires a 100v - 240v AC power source and must be to a compatible RF transmitter (available separately).

As part of our Sunricher range of LED control products, this RF 24v 75w Slim Design LED Driver is designed to control single or Dual channel (CCT) LED products.  The controller / driver can be paired to the Sunricher range of hand held or wall mounted controllers and each unit can be paired with up to eight transmitters enabling multiple control up to 20m away.   Easy to use, simply connect your 100v to 240v AC mains supply and your LED product, then pair the Driver to a compatible Sunricher RF handset or wall panel.    

This Sunricher RF 24v, 200w RF Driver will power and control your 24v LED products by wireless remote control, it is compatible with a variety of Sunricher remote control handsets and wall panels and works in 1, 2, 3 or 4 channel modes.  This is a high quality unit designed for installation purposes and has an integral 200w Constant Voltage 24v Driver.

This Sunricher RF 24v, 96w RF Driver will power and control your 24v LED products by wireless remote control, it is compatible with a variety of Sunricher remote control handsets and wall panels and works in 1, 2, 3 or 4 channel modes.  This is a high quality unit designed for installation purposes and has an integral 96w Constant Voltage 24v Driver.

From our Sunricher range of DALI products this feature rich RF to DALI Group & Scene Controller receives an RF signal and outputs a DALI signal to the DALI line.  It is compatible with DALI DT8 protocols for RGBW Colour changing from one DALI address and it can be used with all compatible DALI masters that support DT8 commands.

This RF to DALI DT8 Group & Scene controller for tunable white LED Products receives an RF signal and outputs it to a DALI signal to the DALI line.  It is DALI bus powered and complies to DALI DT8 standard protocols IEC 62386-102, IEC 62386-207, IEC 62386-209.  The unit is compatible with all DALI lighting control system and with many Sunricher RF duel channel CCT remote controllers.

This four channel RF receiver is designed to work with the SR 2819 and SR-2839W hand sets.  Once paired to the handset you can control your RGB or RGBW lighting products as required.  It is possible to pair up to 8 x handsets to one receiver.  Ideal for both domestic and commercial applications for easy control of your colour changing LED products.

This slim single channel Sunricher RF to TRIAC AC Dimmer will enables you to power on or off and dim your AC mains powered LED products from a compatible Sunricher RF handset or wall panel (available separately).  The unit supports both leading and trailing edge products.

This slim single channel Sunricher RF to TRIAC AC switch will enable you to power on or off your AC mains powered LED products from a compatible Sunricher RF handset or wall panel.
Note: This single channel switch is not suitable for dimming and is designed for professional installation purposes only.  It requires a 100v - 240v AC power source and must be to a compatible RF transmitter (available separately).

As part of our Sunricher range of LED control products, this WiFi to DMX master controller enables control of LED products of up to four channels by DMX512 through your WiFi system using the Easy Home App available for IOS and Android devices.  This unit must be connected to a DMX512 decoder (available from LED Technologies) in order to control your lighting products.

As part of our Sunricher range of LED control products, this high quality RF to DALI single channel Group and Scene Controller is powered from the DALI bus so there is no need for a separate driver.  The unit is compatible with all DALI lighting control system and compatible with many Sunricher RF single channel remote controllers.