LEDTech Single Channel Wireless Receiver 12 Amp

This RF receiver is designed to work when paired with the LEDTech RF handheld transmitter supplied in the dimming remote control set (100.496). This RF LED receiver will control 12v or 24v single colour LED products over two output terminals of 6A each (total output 12A maximum load).

The LED remote receiver can be powered via the jack socket or hard-wired into the terminal block. The receiver will work within 20m of the transmitter and does not require a line of sight due to the radio frequency signal.

Multiple receivers can be purchased and paired to the LED control handset to enable multiple products to be dimmed at the same time in a single zone.

Should power be removed from the system, the built-in memory function on the receiver will restore the last setting when power is restored.

Please refer to the instruction manual on our website for details on how to pair these receivers to the RF signal transmitter to start controlling your LED tape and other LED lighting units.

Browse our range of LED strip lights that can be controlled with this Sunricher RF receiver. Sunricher products also include multiple receivers ranging from single-colour LED, RGB & RGBW colour-changing RF LED Light receivers. This receiver can be implemented into your home automation system for control through smart home hubs.

This LedTech RF single channel receiver is compatible with the hand held transmitter supplied in the LedTech Wireless Dimmer Set (100.496). When paired to the transmitter, the receiver will control our single colour LED products offering a smooth dimming curve, three levels of dimming and power on and off.

Features

• Colour single product
• Built in memory function
• Create the perfect lighting
• 20m reach