We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.

DALI Dimmer (Digital Addressable Lighting Interface)
DALI is a two-way communications protocol used to simplify lighting control in complex lighting installations. A DALI dimmer is a product that allows the DALI network to communicate with and control lighting fixtures. By assigning a DALI address to a dimmer it can then receive and decode dimming commands.
DALI lighting control uses an additional low voltage cable run separate to the mains feed for control signals. Once the signal is received the dimmer will adjust the output PWM frequency to adjust the brightness of the attached product. DALI systems can also be used with colour changing products like RGBW LED strips alongside single colour products.
With a full range of DALI Dimmers in stock including DT6 and DT8 Dimmers, we have dimmers for every install. Shop our range of high-quality DALI dimmers today to integrate your lighting with the DALI.
-
Sunricher DALI AC Phase Cut & Push DimmerProduct Code: SR2303SACHP
This high quality Sunricher AC phase cut dimmer has both a DALI and a push switch control interface. Suitable for both commercial and domestic applications it will switch and dim both mains powered LED and incandescent lamps (resistive and capacitive loads). The unit works with 100v to 240v AC products up to 400w and is compatible with all DALI products
Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 240v AC 240v AC DALI protocols CRI >80 -
Suricher DALI Scene Controller for Motion Sensors with Fixed ScenesProduct Code: SR2412SCENESB
The DALI scene controller is triggered by motion sensors and then recalls up to three preset DALI scenes which can be set on the device. It can control one group of DALI devices on DALI line and the delay time can be set on the controller.
Colour IP Rating Input Voltage Connectivity White IP20 Non-Waterproof DALI Bus Powered DALI protocols -
Sunricher RF to DALI Receiver for Single Colour Group & Scene ControlProduct Code: SR2411RFDIM
As part of our Sunricher range of LED control products, this high quality RF to DALI single channel Group and Scene Controller is powered from the DALI bus so there is no need for a separate driver. The unit is compatible with all DALI lighting control system and compatible with many Sunricher RF single channel remote controllers.
Colour IP Rating Input Voltage Connectivity White IP20 Non-Waterproof DALI Bus Powered DALI protocols -
Sunricher RF to DALI DT8 Receiver for CCT Group & Scene ControlProduct Code: SR2411RFCCT
This RF to DALI DT8 Group & Scene controller for tunable white LED Products receives an RF signal and outputs it to a DALI signal to the DALI line. It is DALI bus powered and complies to DALI DT8 standard protocols IEC 62386-102, IEC 62386-207, IEC 62386-209. The unit is compatible with all DALI lighting control system and with many Sunricher RF duel channel CCT remote controllers.
Colour IP Rating Input Voltage Connectivity Grey IP20 Non-Waterproof DALI Bus Powered DALI DT8 Protocols -
Sunricher RF to DALI DT8 Receiver for RGBW Group & Scene ControlProduct Code: SR2411RFRGB
From our Sunricher range of DALI products this feature rich RF to DALI Group & Scene Controller receives an RF signal and outputs a DALI signal to the DALI line. It is compatible with DALI DT8 protocols for RGBW Colour changing from one DALI address and it can be used with all compatible DALI masters that support DT8 commands.
Colour IP Rating Input Voltage Connectivity Grey IP20 Non-Waterproof DALI Bus Powered DALI DT8 Protocols -
Sunricher DALI Data Repeater with Built-in DALI Bus Power SupplyProduct Code: SR2400AMP
From the Sunricher range of DALI products, this DALI repeater with integrated DALI bus power supply enhances the maximum DALI line length from 300 m up to 600m and the bidirectional transmission of the DALI signals.
The maximum amount of products within a DALI system still remains as 64 DALI devices, the devices can be divided on the subordinate circuits as required.
Colour IP Rating Input Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 100v - 240v AC DALI protocols CRI >80 -
Sunricher DALI to 0-10V ConverterProduct Code: SR230301VPWM
This DALI to 0-10v Signal converter will convert your DALI signal into a 0-10v signal that will control your existing 0-10v dimmable drivers. This is especially useful when integrating your existing 0-10v products into a DALI control system. It is ideal both commercial and domestic applications where a DALI system is used.
Colour IP Rating Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 100v - 240v AC 100v - 240v AC DALI protocols CRI >80 -
Sunricher 4 in 1 LED DALI Dimmer With, Push, Phase Cut & 0-10V InputsProduct Code: SR2303P4IN1
This Multi-function 4 in 1 PWM LED Dimmer works with DALI, Push, 0/1-10V and Phase Cut dimming interfaces. These multi-selectable inputs make this a very desirable product with four input protocols catered for.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 1 x 240w - 720w 12v / 24v / 36v DC 12v / 24v / 36v DC Multiple CRI >80 -
Sunricher DALI Single Channel DimmerProduct Code: SR2303S
This single channel DALI dimmer from our Sunricher range of DALI products has a 12v, 24v or 36vDC 8A output. It complies to DALI standards IEC 62386-102, IEC 62386-207 and matches all DALI systems in the market. One DALI address can be assigned by the DALI master.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 1 X 96w - 288w 12v / 24v / 36v DC 12v / 24v / 36v DC DALI protocols CRI >80 -
Sunricher DALI 4 x Channel DIN Mountable DALI DimmerProduct Code: SR2304DIN
As part of our Sunricher range of LED control products, this high quality four channel universal DALI Dimmer is compatible with the DALI lighting control system. Featuring manual or automatic DALI address settings, this product will integrate seamlessly with your existing DALI control system and is DIN rail mountable for installation purposes.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity White IP20 Non-Waterproof 4 x 60w - 180w 12v / 24v / 36v DC 12v / 24v / 36v DC DALI protocols -
Sunricher DALI 4 x 5A / Channel Dimmer with Push DimProduct Code: SR2304B
As part of our Sunricher range of LED control products, this high quality four x 5A / channel universal DALI Dimmer is compatible with the DALI lighting control system. Featuring manual or automatic DALI address settings, this product will integrate seamlessly with your existing DALI control system.
Note: All four channel outputs work in synchronization.Colour IP Rating Wattage Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 4 x 60w - 180w 12v / 24v / 36v DC 12v / 24v / 36v DC DALI protocols CRI >80 -
Sunricher DALI 4 x 8A / Channel Dimmer with Push DimProduct Code: SR2304BEA
From our Sunricher range of DALI LED control products, this high quality 4 x 8A / channel universal DALI Dimmer is fully compatible with all DALI lighting control systems. Featuring manual or automatic DALI address settings, this product will integrate seamlessly with your existing DALI control products.
Note: All four channel outputs work in synchronization.Colour IP Rating Wattage Input Voltage Output Voltage Connectivity CRI Rating (greater than) White IP20 Non-Waterproof 5 x 96w - 192w 12v / 24v / 36v DC 12v / 24v / 36v DC DALI protocols CRI >80 -
Sunricher DALI DT8 RGBW Four Channel DimmerProduct Code: SR2309FARGBW
This high quality four channel DALI Dimmer supports DALI DT8 protocols for RGBW dimming and colour control. The unit can be configured using the DALI master USB interface and it is compatible with all DALI DT8 products and constant voltage RGBW LED products.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity White IP20 Non-Waterproof 4 x 60w - 180w 12v / 24v / 36v DC 12v / 24v / 36v DC DALI DT8 Protocols -
Sunricher DALI DT8 Dimmer with Colour Type XY CoordinatesProduct Code: SR2309FAXY
This high quality four channel DALI Dimmer supports DALI DT8 protocols for RGBW dimming and colour control. The colour type, RGBW or XY coordinates can also be preset. Works with all DALI DT8 products and constant voltage RGBW LED products.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity White IP20 Non-Waterproof 4 x 60w - 180w 12v / 24v / 36v DC 12v / 24v / 36v DC DALI DT8 Protocols -
Sunricher DALI DT6 RGBW Four Channel Dimmer with Built-in DALI MasterProduct Code: SR2303FAOLED
This multi function four channel DALI DT6 dimmer features a DALI Master function and has many features demanded by professional users. As the PWM frequency can be adjusted up to 30KHz this product is ideal for TV Studio applications where flicker free dimming is required.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity White IP20 Non-Waterproof 4 x 60w - 180w 12v / 24v / 36v DC 12v / 24v / 36v DC DALI DT6 Protocols -
Sunricher DALI DT8 RGBW Four Channel Dimmer with Built-in DALI MasterProduct Code: SR2309FAOLED
This multi function four channel DALI DT8 dimmer features a DALI Master function and has many features demanded by professional users. As the PWM frequency can be adjusted up to 30KHz this product is ideal for TV Studio applications where flicker free dimming is required.
Colour IP Rating Wattage Input Voltage Output Voltage Connectivity White IP20 Non-Waterproof 4 x 60w - 180w 12v / 24v / 36v DC 12v / 24v / 36v DC DALI DT8 Protocols
Where are DALI dimmers used?
DALI is a hard-wired protocol often used in larger systems where wireless protocols could be less reliable. With a range of 300 Metres, DALI is perfect for commercial projects and large office buildings.
DALI is a lighting industry standard for central control through a single lighting interface. By allowing communication between products from different manufacturers DALI is able to simplify complex lighting systems.
For low voltage products, a DALI dimmer is positioned between the power supply and the product itself to adjust the output PWM. By then assigning a DALI address the controller is able to send signals for dimming control.