We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Sunricher DMX LED Driver
DMX drivers from our stunning Sunricher range serve to power and control LED lighting such as
LED strip lightsSimply connect the LED DMX driver to a mains power supply and pair it with a DMX wall panel. Simply connect using a hardwired screened cable.
With up to 512 programmable channels within a “DMX universe”, the protocol is often referred to as DMX 512. Digital Multiplex l is often used in productions where complex lighting control is needed. As it is widely compatible the protocol is also used frequently when programming home automation and AV systems.
Some of our DMX LED drivers are also RDM compatible. RDM settings can be adjusted from a DMX512 RDM controller. RDM or Remote Device Management allows two-way protocols from the device to the controller.
Please speak to our technical sales team for more installation tips and advice. Either by telephone, email or live chat on our website.
What is a DMX Driver?
A DMX controller Supplies a signal that must be decoded to adjust the output of the attached lighting. This is done using a DMX decoder that translates the signal and adjusts the PWM frequency to dim the attached lighting.
Low voltage products require an LED driver to convert mains electricity to a lower suitable voltage. A DMX driver is a power supply and decoder in a single unit, simplifying the installation and often saving on cost.
Once installed the driver can be programmed and addressed using a DMX desk/software.
