JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

View Basket

Sunricher DMX Professional 4 Channel Constant Current 75W DMX Driver with RDM

Product Code: SRP210675WCCF

4 Channel constant current 75w DMX driver
Adjustable output current 300mA - 1,500mA
Adjustable PWM output resolution 8 or16bit
RDM Bi-directional communication
Adjustable PWM frequency from 500Hz-35KHz
Adjustable dimming curve gamma value from 0.1-9.9
DMX or Master mode operation
Input 200v - 240v AC

View full product details and specification

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Currently in Stock

Next day delivery available*

In stock

Speak with an Expert

Product Details

Product Description

This 75w Constant Current, four channel DMX driver from Sunricher features many professional features including RDM Bi-directional communication, adjustable PWM frequency (up to 35KHz), adjustable PWM bit rate resolution of 8bit or 16bit and an adjustable dimming curve either linear or logarithmic with gamma values from 0.1 to 9.9. The driver is very efficient with a high power factor >0.9 at 230v AC and it has an "in built" short circuit protection with automatic recovery after the fault condition is removed.

The unit is compatible with all DMX512 master controllers and it can be used for many professional projects including installation in commercial or domestic premises, however with the features detailed above it is particularly suitable for use in film and TV production. The driver has an adjustable output from 300mA up to 1,500mA and it will control four channel LED products up to a maximum total output load of 75w. This DMX Driver has two modes of operation and can be set to either DMX mode or Master mode. DMX mode is used when the driver is connected to a DMX512 controller and Master mode enables you to test your lighting products and also select a number of dimming levels or built in programs that will run without the need for a DMX controller. Note: More information on the programs and dimming levels available are detailed in the included Datasheet / instruction manual.

The output current is selectable using the dip switches on the front panel of the driver and the various running options and settings are achieved by using the menu buttons and digital display. The driver can be set to single channel, Dual channel, three channel or four channel modes depending on your requirements.

Quick Specs

What's in the box?

Constant Current DMX Driver
Instruction Manual / Data Sheet

Technical Specification

Product Code:	SRP210675WCCF
Product Packed	Gift box
Manufacturer	LED Technologies
Product Type	DMX 512 Driver
Colour	White
IP Rating	IP20 Non-Waterproof
PWM Frequency	500Hz to 35KHz
Guarantee Period The guarantee period is the length of time a replacement or refund will be issued if the product becomes faulty and all operating and installation requirements have been met.	5 Years
Wattage	75W
Current	400mA @ 230VAC Full Load
Input Voltage This is the required amount of volts needed to power the product.	200V - 240V AC
Output Voltage	8V-48V
Output Current	300mA to 1,500mA
Connectivity	DMX 512 protocols
Size	244 x 64 x 32mm
Dimmable:	Yes
Power Factor >	0.9

Continuous Operation	Not suitable for 24/7 continuous use
Voltage Type	Constant Current
Max Bend	Not Applicable
Adjustable Dimming Curve & Gamma Value	Yes
Adjustable Bit Rate	Yes
Adjustable PWM	Yes
Relative Humidity	10% - 95% RH
RDM	Yes
Operating Temp	0-40°C