Lighting control with 0-10V dimmers

As part of our Sunricher range of LED control products, this RF to 0-10v Receiver / Converter enables you to control your 0-10v products by the Sunricher RF remote control handsets or RF wall panels.  You can pair upp to 8 x RF transmitter to one converter.

This DALI to 0-10v Signal converter will convert your DALI signal into a 0-10v signal that will control your existing 0-10v dimmable drivers.  This is especially useful when integrating your existing 0-10v products into a DALI control system.  It is ideal both commercial and domestic applications where a DALI system is used.

This Multi-function 4 in 1 PWM LED Dimmer works with DALI, Push, 0/1-10V and Phase Cut dimming interfaces.  These multi-selectable inputs make this a very desirable product with four input protocols catered for.

As part of our Sunricher range of LED control products, this high quality, 0-10v single channel Dimmer unit is designed to control single colour LED products from an existing 0-10v controller.  The dimmer receives the 0-10v signal from the controller converts that to a PWM output to power the tape and give a smooth analogue dimming curve.

As part of our Sunricher range of LED control products, this high quality, 0-10v four channel DIN mountable Dimmer unit is designed to control up to four channels of LED products from an existing 0-10v standard input device.  The unit can coordinate with a 0-10 regulator or a 0-10v dimmer to give a smooth analogue dimming curve.

As part of our Sunricher range of LED control products, this high quality, 0-10v four channel Dimmer unit is designed to control up to four channels of LED products from an existing 0-10v standard input device.  The unit can coordinate with a 0-10 regulator or a 0-10v dimmer to give a smooth analogue dimming curve.