This high quality RF Wall panel from our Sunricher range has a much thinner ultra-sensitive, high strength glass touch panel with double touch sliders and back lighting.  The user-friendly interface is easy to operate and the wall panel works wirelessly with the SR1009EA5Ch Receiver to control your RGB+CCT Lighting products by remote control.

This DALI DT6 four group, four scene Wall Panel for single colour LED products enables control of 4 groups of DALI DT6 single colour devices.  It supports all DALI DT6 devices on the market and can be powered by a 12v or 24v DC source.  The wall panel has stylish white glass panel with a touch sensitive control surface for ease of use.

This high quality DMX512 Wall panel from our Sunricher range has a much thinner ultra-sensitive, high strength glass touch panel with double touch sliders and back lighting.  The user-friendly interface is easy to operate and the wall panel works all DMX512 5 Channel Decoders to control your RGB+CCT Lighting products by DMX.

As part of our Sunricher range of LED control products, this high quality, 0-10v four channel DIN mountable Dimmer unit is designed to control up to four channels of LED products from an existing 0-10v standard input device.  The unit can coordinate with a 0-10 regulator or a 0-10v dimmer to give a smooth analogue dimming curve.

From the Sunricher range of controllers this wall mounted, rotary knob, RF remote control transmitter can switch and dim your single colour LED product. 

It is fitted with a long life battery so requires no external power supply, simply pair with a compatible Sunricher receiver and you are ready to go.  Ideal for both domestic and commercial applications.

The DALI scene controller is triggered by motion sensors and then recalls up to three preset DALI scenes which can be set on the device.  It can control one group of DALI devices on DALI line and the delay time can be set on the controller.

As part of our Sunricher range of LED control products, this single channel "close up" PIR switch is designed to switch a single colour LED or halogen product when the PIR motion sensor is activated.  Once activated it will stay on until movement is detected one more. This compact but reliable PIR switch is ideal for installing in walk in cupboards or even furniture as it will switch on the LED light when the sensor detects movement.  Works with mains powered products from 100v to 240v AC.

As part of our Sunricher range of LED control products, this single channel "close up" PIR switch is designed to switch a single colour LED or halogen product when the PIR motion sensor is activated.  Once activated it will stay on until movement is detected one more. This compact but reliable PIR switch is ideal for installing in walk in cupboards or even furniture as it will switch on the LED light when the sensor detects movement.  Works with mains powered products from 100v to 240v AC.

This circuit board mounted touch sensitive mini dimmer from our Sunricher range of products is designed to be mounted into extrusion or a recess.  it is a hard wired component for professional installation only.  Simply touch the touch sensitive pad and hold to decrease or increase the brightness of your single colour low voltage LED product.

From the Sunricher range of controllers this wall mounted, push switch RF remote control wall panel can switch and dim your single colour LED product.  It is fitted with a long life battery so requires no external power supply, simply pair with a compatible Sunricher receiver and you are ready to go.  Ideal for both domestic and commercial applications.

From the SunRicher range of controllers this wall mounted, duel zone, RF remote control transmitter can switch and dim your single colour LED products. It is fitted with a long life battery so requires no external power supply, simply pair with a SunRicher receiver and you are ready to go. Ideal for both domestic and commercial applications.

From the SunRicher range of controllers this wall mounted, four zone, RF remote control wall panel can switch and dim your single colour LED products.  It is fitted with a long life battery so requires no external power supply, simply pair with our SunRicher receivers and you are ready to go.  Ideal for both domestic and commercial applications.

From the SunRicher range of controllers this wall mounted, RF remote control transmitter can switch, dim and control your colour temperature adjustable LED Flex. 

Fitted with a long life battery it requires no external power supply, simply pair with a SunRicher receiver and you are ready to go.  Ideal for both domestic and commercial applications.

From the Sunricher range of controllers this wall mounted, push switch RF remote control wall panel can switch, dim and adjust the colour temperature from cool to warm white of your Dual colour LED products. 

It is fitted with a long life battery so requires no external power supply, simply pair with a compatible Sunricher receiver and you are ready to go.  Ideal for both domestic and commercial applications.

This high quality RF Wall panel from our Sunricher range has a much thinner ultra-sensitive, high strength glass touch panel with double touch sliders and back lighting.  The user-friendly interface is easy to operate and the wall panel works wirelessly with compatible receivers to control your Colour temperature adjustable LED lighting products by remote control.

From the Sunricher range of RGBW controllers this wall mounted, single zone RF remote control transmitter can store up to four programmable scenes.  Simply connect to a 12V or 24v supply and pair with a Sunricher four channel receiver for control over your quad colour LED Lighting.  This product is ideal for domestic and commercial applications.

From the Sunricher range of RGBW controllers this wall mounted, Four Zone RF remote control transmitter can control up to four individual zones and has a single programmable scene to store your favorite colour to each zone. 

Simply connect to a 240v supply and pair with a Sunricher four channel receiver for control over your quad colour LED Lighting.  This product is ideal for both domestic and commercial applications.

This high quality RF Wall panel from our Sunricher range has a much thinner ultra-sensitive, high strength glass touch panel with double touch sliders and back lighting.  The user-friendly interface is easy to operate and the wall panel works wirelessly with compatible receivers to control your RGBW Lighting products by remote control.

From the SunRicher range of controllers this low voltage wall mounted, rotary knob DMX wall panel can switch and dim your single colour LED products using DMX512 protocols.  Ideal for both domestic and commercial applications, simply connect to a suitable DMX512 decoder for full control over your single colour LED lighting.

From the Sunricher range of DMX512 controllers this mains powered DMX wall panel can switch and dim your single colour LED products using DMX512 protocols.  Ideal for both domestic and commercial applications, simply connect to a mains power supply and a suitable DMX512 decoder for full control over your single colour LED lighting.

From the Sunricher range of DMX512 Wall Panel Touch Controllers this mains powered, four zone, four scene DMX wall panel will control your single colour LED lighting products using DMX512 protocols.   Link the wall panel to a suitable DMX decoder for full control of your LED Lighting products.
The wall panel features a stylish touch sensitive white glass front panel.

From the Sunricher range of DMX512 Wall Panel Touch Controllers this mains powered, four zone, four scene DMX wall panel will control your colour temperature adjustable LED lighting products using DMX512 protocols.   Link the wall panel to a suitable DMX decoder for full control of your LED Lighting products.
The wall panel features a stylish touch sensitive white glass front panel.

From the Sunricher range of wall mounted controllers, this single zone, duel colour, DMX wall panel will control your duel colour LED lighting products.  There are three programmable scenes and easy switching between colour temperature or brightness control, the unit should be linked to a suitable DMX decoder for full control of your duel colour LED lighting.

From the Sunricher range of wall mounted controllers, this four zone, dual colour, DMX wall panel can control up to four independent zones with two programmable scenes.  With easy switching between colour temperature or brightness control, the unit can be linked to a suitable DMX decoder for full control of your dual colour LED lighting.

From the SunRicher range of controllers this duel colour + RGB DMX512 wall panel will control up to four independent zones (2 x CCT & 2 x RGB).  With easy switching between colour temperature and RGB colour control the wall panel should be linked to a DMX decoder.
The wall panel features a touch sensitive black glass front panel.

From the SunRicher range of RGBW controllers this low voltage, single zone, one scene wall panel will control your LED lighting using DMX512 protocols.   Link the wall panel to suitable four channel DMX decoders for full control of your quad colour LED Lighting products.
The wall panel features a touch sensitive black glass front panel.

From the SunRicher range of RGBW controllers this low voltage, four scene, single zone DMX wall panel will control LED lighting using DMX512 protocols.   Link the wall panel to suitable four channel DMX decoders for full control of your quad colour LED Lighting products.
The wall panel features an attractive touch sensitive white glass front panel.

From the SunRicher range of RGBW controllers this low voltage, four scene, single zone DMX wall panel will control LED lighting using DMX512 protocols.   Link the wall panel to suitable four channel DMX decoders for full control of your quad colour LED Lighting products.
The wall panel features a touch sensitive black glass front panel.

From the Sunricher range of RGBW controllers this low voltage, four zone, single scene DMX wall panel will control LED lighting using DMX512 protocols.   Link the wall panel to suitable four channel DMX decoders for full control of your quad colour LED Lighting products.
The wall panel features a touch sensitive black glass front panel.

This compact RGBW RF handset is for use with the SR2811 DMX + RF wall panels only.  The handset allows remote control of your DMX wall panel from up to 20m away and with a handy magnetic wall bracket it can be fixed almost anywhere to suit.

From the Sunricher range of RGBW controllers this low voltage, single zone, DMX & RF wall panel will control your LED lighting using DMX512 protocols.   This wall panel can also be paired to the SR2811RF Sunricher RF handset for remote control operation of your quad colour lighting products.
The wall panel features a touch sensitive white glass front panel.

From the Sunricher range of RGBW controllers this low voltage, single zone, DMX & RF wall panel will control your LED lighting using DMX512 protocols.   This wall panel can also be paired to the SR2811RF Sunricher RF handset for remote control operation of your quad colour lighting products.
The wall panel features a touch sensitive black glass front panel.

This DALI DT6 & DT8 Wall Panel for RGB colour Tri-Colour LED products enables control of 1 group of RGB DALI DT8 devices.  It supports all DALI DT6 & DT8 devices on the market and is DALI bus powered so does not require a separate driver.  The wall panel has stylish glass back panel with a brushed aluminium control knob which features a back-light around the knob to indicate the dimming status.