Featuring full touch controls, this mains powered DMX LED wall panel lighting controller is available from our range of Mi-Light products. The handset can control your single colour (including warm white and cool white) LED lights through its impressive touch panel controls. The controllable products include LED fixtures such as:
This feature-rich DMX LED controller can control up to four zones of DMX512 lighting. You can also pair the wall panel to a 2.4GHz receiver or a 2.4GHz compatible lighting product as it will also work as an RF controller.
Using its high-quality LED dimmer slider controls, this LED remote control features:
- Smooth Dimmable adjustment
- Up to 4 Zone control
When using the RF system, an unlimited number of receivers/lights can be paired to each zone on the wall panel. It is possible to control multiple products in each of the four zones. Simply pair each product to your chosen zone.
To operate individually, switch on the zone with the appropriate button and select the required brightness level using the touch slider control. A master On/Off button will switch all the zones On/Off together.
When used as a DMX wall panel, simply connect a DMX cable from the wall panel to your DMX decoders or DMX compatible lighting product. This will send a DMX signal between the two, allowing you to control them using standard DMX512 protocols.
In addition to the DMX512 protocols and the RF transmitter built into the wall panel, it is also possible to pair a 2.4GHz handset or 2.4GHz wall panel to the X1 wall panel to control it remotely.
- This effectively enables you to control your DMX lighting from the DMX wall panel or via a 2.4GHz handset paired to the wall panel.
- Please refer to the detailed instructions on the wall panel Datasheet for more information on how to use this multi-functional wall panel.
This LED controller touch panel is easy to install. Simply wire your panel up to a mains supply, making sure an input voltage of AC 100-240V is being used. The panel should also be connected to your DMX lighting using a three core screened DMX cable.
The LED controller will work up to 30m away from the paired lighting devices. A timer function on the handset will delay your lighting from switching off. When your luminaires are set to a single colour (static mode) you can select a 60 second or 10-minute delay. This is a very useful function that gives you time to exit a room or area before the lights turn off.
Note: A line of sight is not needed between the wall panel and the LED light. Although, walls or obstructions may weaken the signal.
If you're looking to control your colour changing LED lights, LED Technologies also supply a DMX RGB+CCT Panel Remote Controller. With the stunning RGB LED colour wheel, you can control your RGBW LED lights with ease.
Compatible Mi-Light LED lighting is sold separately. All Mi-Light products purchased from LED technologies carry an exclusive five-year warranty.
For product assistance please contact us by telephone, email or via the website live chat.