Switches & Sensors

As part of our Sunricher range of LED control products, this single channel "close up" IR switch is designed to switch a single colour LED or halogen product when the PIR motion sensor is activated.  Once activated it will stay on until movement is detected one more. This compact but reliable PIR switch is ideal for installing in walk in cupboards or even furniture as it will switch on the LED light when the sensor detects movement.  Works with low voltage products from 12v to 36v DC.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher In-Wall ZIGBEE AC switch can be incorporated into such a network and will connect to any other licenced ZIGBEE product as part of the ZIGBEE network of devices to switch on and off your mains powered products.  This switch works with both resistive and capacitive loads and does not require a neutral lead connection.

As part of our Sunricher range of LED control products, this single channel "close up" PIR switch is designed to switch a single colour LED or halogen product when the PIR motion sensor is activated.  Once activated it will stay on until movement is detected one more. This compact but reliable PIR switch is ideal for installing in walk in cupboards or even furniture as it will switch on the LED light when the sensor detects movement.  Works with mains powered products from 100v to 240v AC.

As part of our Sunricher range of LED control products, this single channel "close up" PIR switch is designed to switch a single colour LED or halogen product when the PIR motion sensor is activated.  Once activated it will stay on until movement is detected one more. This compact but reliable PIR switch is ideal for installing in walk in cupboards or even furniture as it will switch on the LED light when the sensor detects movement.  Works with mains powered products from 100v to 240v AC.

As part of our Sunricher range of LED control products, this single channel PIR switch is designed to switch a single colour LED product when the PIR motion sensor is activated.  Once activated it will stay on for one minute. This compact but reliable PIR switch is ideal for installing in walk in cupboards or even furniture as it will switch on the LED light when the sensor detects movement.

As part of our Sunricher range of LED control products, this single channel PIR switch is designed to switch a single colour LED product when the PIR motion sensor is activated.  Once activated it will stay on for one minute. This compact but reliable PIR switch is ideal for installing in walk in cupboards or even furniture as it will switch on the LED light when the sensor detects movement.

This circuit board mounted touch sensitive mini dimmer from our Sunricher range of products is designed to be mounted into extrusion or a recess.  it is a hard wired component for professional installation only.  Simply touch the touch sensitive pad and hold to decrease or increase the brightness of your single colour low voltage LED product.

This slim single channel Sunricher RF to Phase Cut AC switch will enable you to power on or off your AC mains powered LED products from a compatible Sunricher RF handset or wall panel.
Note: This single channel switch is not suitable for dimming and is designed for professional installation purposes only.  It requires a 100v - 240v AC power source and must be to a compatible RF transmitter (available separately).

This slim single channel Sunricher RF to TRIAC AC switch will enable you to power on or off your AC mains powered LED products from a compatible Sunricher RF handset or wall panel.
Note: This single channel switch is not suitable for dimming and is designed for professional installation purposes only.  It requires a 100v - 240v AC power source and must be to a compatible RF transmitter (available separately).

This slim single channel Sunricher DMX decoder will switch on or off your AC mains powered LED products using DMX protocols.
Note: This single channel DMX decoder is not suitable for dimming and is designed for professional installation purposes only.  It requires a 100v - 240v AC power source and must be connected to a DM512 data source to switch.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher In-Wall ZIGBEE AC switch can be incorporated into such a network and will connect to any other licenced ZIGBEE product as part of the ZIGBEE network of devices to switch on and off your mains powered products.  This switch works with both resistive and capacitive loads.

Z-Wave is a quality home automation system that links various Z-Wave products or "nodes" together to switch and control Z-Wave licenced devices that are connected to its network.

This high quality Sunricher In-Wall Z-Wave AC switch can be incorporated into such a network and will connect to any other licenced Z-Wave product as part of the Z-Wave network of devices to switch on and off your mains powered products.  This switch works with both resistive and capacitive loads.

The DALI scene controller is triggered by motion sensors and then recalls up to three preset DALI scenes which can be set on the device.  It can control one group of DALI devices on DALI line and the delay time can be set on the controller.