Led Tech

The LedTech wireless RGB remote control transmitter is designed to be used with the Wireless RGB receiver (100.255). 

Once paired, the transmitter offers smooth colour selection using the touch sensitive coloured disc together with dimming, power On / Off and program selection of fifteen different built in programs.

This LedTech wireless CT remote control transmitter is compatible with the LedTech CT receiver (100.276).  When paired to the receiver, the transmitter will control our colour temperature adjustable LED flex from warm to cool white (2,800K - 6,500K) using the blue touch sensitive disc.  There are also three levels of brightness and power on & off.

The LedTech RGB receiver is designed to be used with the LedTech RGB remote control transmitter (100.254).

The receiver will control Tri-Colour (RGB) 12v or 24v LED products and any number of the receivers can be paired to a transmitter. We also recommend the LedTech RGB Data Amplifier (100.256) when synchronising multiple RGB products together.

This LedTech RF two channel CT receiver is compatible with our hand held CT transmitter (100.275).  When paired to the transmitter, the receiver will control our colour temperature adjustable LED Flex enabling the tape to be adjusted between 2,800K & 6,500K (Warm and Cool White).

The LedTech Square Wall Mounted RGB Touch Controller is designed for installation purposes and should be connected to a 12v or 24v supply as required.

The panel offers smooth colour selection using the touch sensitive coloured disc together with dimming, power On / Off and program selection of various built in programs.

Our range of 24v LED drivers are suitable for powering our 24v LED products. The 24v, 100w laptop style driver includes a mains lead with fitted plug and connector to plug into the driver.

The 24v output side is hard wired into the driver and fitted with a 24v female jack socket which can plug into our range of 24v LED flexible lighting products.

This three channel Data Amplifier will copy up to three channels of data, effectively enabling multiple LED products of up to three channels to be synchronised together from an RF Receiver or DMX decoder. 

This is a great solution for installation purposes and should be connected to a suitable LED driver to provide a power source.

Our range of 12v LED drivers are suitable for powering our 12v LED products.

This 48w laptop style driver includes a mains lead with fitted plug and connector to plug into the driver. The 12v output side is hard wired into the driver and fitted with a 12v female jack socket which can plug into our range of 12v LED flexible lighting products.

This 60w, 5Amp aluminium installation style 12v LED driver is suitable for powering our 12v LED flexible lighting products.

With an IP67 rating and strong aluminium case, the driver can be used in wet or damp conditions and has lugs attached so that the driver can be fixed into place.

This 100w, 4Amp aluminium installation style 24v LED driver is suitable for powering our 24v LED flexible lighting products.

With an IP67 rating and strong aluminium case, the driver can be used in wet or damp conditions and has lugs attached so that the driver can be fixed into place.

This LedTech 6m long DMX lead is made from a quality "soft feel" screened cable so it can be easily wrapped even in cold conditions.  It is fitted with three pin male and female XLR connectors so can be connected to any DMX512 product with three pin XLR Sockets.

This in-line dimmer from LedTech offers an easy on / off and dimming function to control our LED flexible lighting products.  When used in conjunction with our laptop style LED drivers and 12v or 24v LED tape, it offers a simple plug and play solution to switch and adjust the brightness of the tape without any additional products.

Our range of 12v LED drivers are suitable for powering our 12v LED products. The 12v, 100w laptop style driver includes a mains lead with fitted plug and connector to plug into the driver.

The 12v output side is hard wired into the driver and fitted with a 12v female jack socket which can plug into our range of 12v LED flexible lighting products.

The LEDTech 24v Honeycomb modules comprise of a series of flat panels in various sizes that can be linked together to form a larger panel.  Due to the wide beam angle and layout of the LED's they are a perfect solution for fast easy construction of light boxes.  The linking posts that join the panels together also link the power through the panels.

The LEDTech 24v Honeycomb modules comprise of a series of flat panels in various sizes that can be linked together to form a larger panel.  Due to the wide beam angle and layout of the LED's they are a perfect solution for fast easy construction of light boxes.  The linking posts that join the panels together also link the power through the panels.

The LEDTech 24v Honeycomb modules comprise of a series of flat panels in various sizes that can be linked together to form a larger panel.  Due to the wide beam angle and layout of the LED's they are a perfect solution for fast easy construction of light boxes.  The linking posts that join the panels together also link the power through the panels.

The LEDTech 24v Honeycomb modules comprise of a series of flat panels in various sizes that can be linked together to form a larger panel.  Due to the wide beam angle and layout of the LED's they are a perfect solution for fast easy construction of light boxes.  The linking posts that join the panels together also link the power through the panels.