Access your account by completing the following login form.

or
View Basket

3 Pin Strip to Strip Bridge Clip Connector for IP67 CCT Strip 10mm (Inner) 12mm (Outer) Pack of 5

Product Code: 400.249
  • IP67 Rated Strip to Strip Bridge Clip Connector
  • For IP67 rated SMD LED type strips
  • Max load 36V 5A
  • 3 x pin LED strip to strip bridge clip connector
  • For 10mm (inner) 12mm (outer) LED Strips
  • Fast connection to LED Strip
  • With fitted 180mm bridge link cable
  • No Soldering required
  • Connector dims (18mm Wide x 10mm Deep)
  • Secure mechanical & electrical connection
  • Pack of 5 Connectors
IP67
Currently in Stock
Next day delivery available*

In stock
Speak with an Expert
Speak with an Expert

Product Description

When you require a reliable, IP67 rated, compact connector to link your LED strip to another LED Strip with a wire bridge in between, this mini strip to strip bridge clip connector from our professional range of discrete connectors is the ideal solution. The connector is suitable for 3 Pin CCT Colour Temperature Adjustable, IP67 rated SMD type LED strips with an inner strip width of 10mm and an outer coated width of 12mm. The connectors are rated at Max load 36V 5A and have a wire bridge "link lead" forming a gap of 180mm from one strip to another, this is ideal for linking LED Strips together. The outer dimensions of the connector are 18mm Wide x 10mm Deep so they can be incorporated into a profile enabling you to hide the connector inside the profile if required (check profile dimensions for suitable fit).

The connectors are clamped into place on the LED Strip by sliding the transparent part of the connector over the LED Strip and then joining the two together, gripping the connector firmly at the clip point and closing the connector around the LED Strip, take care to slide the LED strip into the connector body all the way so that the pins line up with the cut points on the LED Strip. Squeeze the connector closed firmly until it clicks into place.

Note: The connector will pierce the LED strip ensuring a secure grip onto the tape so it will not slide off, the electrical connection is also very secure so there is minimal voltage loss over the joint. Once the connector has been clamped onto the strip, it is not recommended to remove it as damage to the LED Strip will occur. If it is necessary to remove the connector, carefully insert a small flat headed screwdriver under the side clips to release them, care must be taken to avoid injury as it is easy to slip with the screwdriver. Once the connector has been used it is not advisable to use it again.

For more information on this or any of our connector range, please contact our technical sales team by phone, email or via live chat and WhatsApp on our website.

Quick Specs

IP67

What's in the box?

  • 1 x Pack of 5 x 10mm 3 x Pin IP67 Rated Bridge Clip Connectors
Product Code: 400.249
Product Packed Anti static Bag
Product Type Connectors
IP Rating IP67 Waterproof
Current 5A
Dimmable: No
Datasheet - 400.249 Download

We currently have no product FAQs, ask your question

Filters
Refine