The LedTech range of solderless tape connectors are designed to make joining our uncoated LED tape products simple without the need to make soldered joints. This connector has a simple clip fitting but first ensure that the LED tape is cut only at the clearly marked cutting points and that the copper or soldered tabs are showing.
Important: The copper tabs are protected with a layer of clear lacquer, before attaching the connector, carefully scrape away the lacquer to ensure a good connection.
Open the connector covers and insert the tapes to be joined into the slot on each side of the connector, ensuring that the copper or soldered tabs are lined up with the tabs on the connector. Close the two connector covers making sure that they are firmly clipped into place and the locking tabs are latched.
Do not daisy chain more than 5m of LED tape in one long line, please ensure that you follow this rule when joining tape together otherwise the tape could overheat causing it to fail.
What's in the box?
10mm Solderless RGB Connector