This 24V LED strip light driver is from LED Technologies. It is suitable to power our Lifestyle or Proflex 24v products and LED tape lights.
24V LED lighting require a 24v LED power supply unit / LED driver / LED transformer. This will connect your lighting to a mains power supply.
A constant current LED driver is a power supply that regulates the voltage supply to a lighting product such as LED light strips.
To get the best performance out of your drivers, only load the driver to around 75% of the drivers' value. For example, a 200W driver should only run at 150W. Therefore this 100W driver should only be used for 75W or lower lighting fixtures.
Lighting transformers use a constant voltage for powering LED's. The LED light drivers total wattage should be more than the required wattage of the product. Different types of LED drivers will have different output voltages, make sure to select the correct constant voltage LED driver for the product you are powering.
This 24 volt driver measures 170mm wide, 65mm in length and 40mm in height. It is an ideal solution for powering LED lighting products.
This LEDTech driver has an IP rating of IP20. The 2 stands for protection against objects that are 125mm or greater. For example, this could be touching. The 0 means that there is no protection against water.
Therefore, this driver is not waterproof and is only suitable for indoor lighting.
Read our case study on IP rating and what they mean for more information.
It is perfect for powering lights in indoor installations such as in your home in living rooms, bedrooms or hallways. They are also perfect for commercial spaces such as hotels or restaurants. The small compact design enables the LED tape driver to be easily hidden.
To install the driver, effortlessly connect the female jack socket to the male jack socket on the strip light. Then plug into a suitable mains power supply. It is a quick and easy set up that will enable you to plug and play immediately.
Other Products
LED Technologies offer a wide range of high quality LED Drivers suitable for a range of LED products including
- 12v Drivers
- 36V Drivers
- Waterproof Drivers
- 300/350W Drivers
We also offer a huge selection of LED strip lights including
- Single Colour
- CCT adjustable
- White
- RGB colour changing
- RGBW
- Ultra Violet
- Waterproof and non waterproof
Shop our range of products through our website or contact our technical sales team on 01260 540014.
