JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

View Basket

LEDTech | 100W 24V TRIAC Dimmable LED Driver

Product Code: 101.108

100w 24V TRIAC dimmable driver
Constant voltage PWM TRIAC dimmer
PWM Frequency is 4KHz
IP66 rated (splash proof)
For leading or trailing edge dimmers
Recommended load rating 5% to 100%
Smooth dimming curve
110v – 277v AC input
Short, overload & over temp protection
Use dimmers 1.5 x driver value

View full product details and specification

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Currently in Stock

Next day delivery available*

In stock

Speak with an Expert

Product Details

Product Description

This superb quality TRIAC dimmable 24V LED Driver from LEDTech will switch and dim your single colour 24V LED strips smoothly and without flicker when loaded between 5% & 100% (5W & 100W). The driver’s dimming output protocol is PWM.

Simply connect to your mains-powered TRIAC Dimmer for smooth, flicker-free dimming. Unlike some dimmers that have a much narrower load tolerance, you will have none of the associated dimming dropouts or flickering at low dimming levels that TRIAC dimmable drivers tend to suffer from. This will only be the case, provided the load does not exceed the 5% - 100% parameters.

Note: We recommend using a dimmer that is rated 1.5x the driver value, so for this unit please make sure that the dimmer switch used is rated at a minimum of 150W.

Made from quality components, this driver is IP66-rated so can be used in external environments (subject to the positioning restrictions with mains-powered products).

Please note that all connections to this driver should be made within an IP67 or IP68-rated junction box or Raytech connector cover to maintain the IP rating of the driver.

For protection, the driver has built-in "Short Circuit", "Over Load" and "Over Temperature" protection. All of them recover automatically after the fault is removed or in the case of over temperature, the unit will reset when it has cooled down.

Quick Specs

What's in the box?

What's In the box?

LEDTECH 100w 24v Dimmable Driver

Technical Specification

Product Code:	101.108
Product Packed	Box
Manufacturer	LED Technologies
Product Type	Power Supplies
Colour	Brushed Aluminium
IP Rating	IP66 Splashproof
PWM Frequency	4KHz
Guarantee Period The guarantee period is the length of time a replacement or refund will be issued if the product becomes faulty and all operating and installation requirements have been met.	2 Years
Wattage	100W
Current	4.1A
Input Voltage This is the required amount of volts needed to power the product.	110V - 277V AC
Output Voltage	24V DC
Connectivity	PWM protocols
Size	273 x 78 x 46mm (L x W x H)
Power Consumption:	100w
Dimmable:	Yes
Voltage Tolerance	±0.5V

Rated Current	4.2a
Rated Power	100W
Load Regulation	±2%
Voltage Range	180-250VAC
Frequency Range	47 - 63Hz
Power Factor	PF≥0.96/220VAC
Efficiency	88%
AC Current	0.45a
Leakage Current	﹤0.70mA/220VAC
Over Load	≦120%
Protection Class	1
Working Temperature	-40~+60℃
Working Humidity	20 - 90%RH, non-condensing
Storage Humidity	10 - 95%RH
Storage Temperature	-40 - +80℃
Temp Coefficient	±0.03%/℃(0 - 50℃)
Vibration	10~500Hz, 2G 10min./1 cycle,period for 60min
Safety Standards	EN61347-1 EN61347-2-13
Withstand Voltage	I/P-O/P:3.75KVAC
Isolation Resistance	I/P-O/P：100MΩ/500VDC/25℃/70%RH
EMC Emission	EN55015,EN61000-3-2,3 (≧50%loading)
EMC Immunity	EN61000-4-2,3,4,5,6,11(Surge 4KV）
Packing	10pcs /CTN SIZE: 329 X 279 X 176mm
Unit Weight	1.6Kg
Operating Temp	NA