Access your account by completing the following login form.

or
View Basket

Neon Flex Topview end cap pack x10 | NEOLINEAR

Product Code: 100.883
  • For use with NEOLINEAR™ Topview
  • Seal your installation
  • Clear silicone body
  • Easy to fit
Currently in Stock
Next day delivery available*

In stock
Speak with an Expert
Speak with an Expert

Product Description

This "top view" end cap is designed to fit onto the "top view" NEOLINEAR™ to seal the flex after it has been cut to size.  NEOLINEAR™ should only be cut at the marked cutting points and once cut it cannot be re-joined.  It is also important to note that the IP67 rating of the NEOLINEAR™ is reduced to IP65 when the end cap is fitted.

To install the end cap first make sure that the cut end of the flex is thoroughly coated with common silicone sealant, the end cap should then be carefully fitted over the cut point and then sealed into place with the common silicone sealant, which should then be left to dry completely before the installation is carried out.  Extra care should be taken to ensure that the end cap is not immersed or in constant contact with water.

All our NEOLINEAR™ products and accessories are designed for professional installation purposes, please ensure you read the installation instructions carefully to get the best out of your NEOLINEAR™.

Quick Specs

Product Code: 100.883
Product Packed Anti static Bag
Manufacturer LED Technologies
Product Type End Caps
Colour
rthrhrh
Brushed Aluminium
PCB Weight Not Applicable
CRI Rating (greater than) CRI >80
Dimmable: No
LED Type Not Applicable
Average LED life Hrs 30,000
Colour Temperature Variation IP20 No
Power Factor > Not Applicable
Continuous Operation Not suitable for 24/7 continuous use

We currently have no product FAQs, ask your question

Filters
Refine