LED Driver 100w

This 100w, 4Amp MeanWell installation type 24v LED driver is suitable for powering our 24v LED flexible lighting products.

This driver is for professional installation use and is a caged design. As such it should be installed in a well vented area where access to the live terminals on the driver is restricted.

Our range of 24v LED drivers are suitable for powering our 24v LED products. The 24v, 100w laptop style driver includes a mains lead with fitted plug and connector to plug into the driver.

The 24v output side is hard wired into the driver and fitted with a 24v female jack socket which can plug into our range of 24v LED flexible lighting products.

This 100w, 4Amp aluminium installation style 24v LED driver is suitable for powering our 24v LED flexible lighting products.

With an IP67 rating and strong aluminium case, the driver can be used in wet or damp conditions and has lugs attached so that the driver can be fixed into place.

This Sunricher RF 24v, 96w RF Driver will power and control your 24v LED products by wireless remote control, it is compatible with a variety of Sunricher remote control handsets and wall panels and works in 1, 2, 3 or 4 channel modes.  This is a high quality unit designed for installation purposes and has an integral 96w Constant Voltage 24v Driver.

This Multi-function Intelligent 4 in 1 PWM Dimmable Driver works with DALI, Push, 0/1-10V and TRIAC dimming interfaces.  Simply connect this driver to a 240v AC mains supply, select the method of control and connect the appropriate devices for full control and smooth dimming of your single colour LED product.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher RGBW colour changing constant voltage ZIGBEE Driver can be incorporated into a ZIGBEE network and will connect to any other ZIGBEE product as part of a network of devices to control your LED products.  Note: With ZIGBEE 3.0, the W channel is controller by the CCT Command.

This high quality four channel DALI 24v 96w Driver supports DALI DT8 protocols for RGBW dimming and colour control.  The unit can be configured using the DALI master USB interface and it is compatible with all DALI DT8 products and constant voltage RGBW LED products.  The unit features 100v - 240v Input and a 24v 96w Constant Voltage output.