LED Strip Lights
- LED Floods
- LED Downlighters
This particular extrusion is our most popular profile for installing our range of 13mm wide IP67 rated (coated) products and it will also fit single, double and triple modules. This is an extra large extrusion that will accommodate products up to 33mm wide.
To install this extrusion, first install the fixing channel as required then slide the extrusion onto the channel. This extrusion is supplied with a white diffuser, and with a large gap between the tape and the diffuser there is little or no pixilation and for ease of installation, the white diffuser is a clip on type so can be attached after the product is installed.
This extrusion is master packed in units of 10 x 1m lengths and is supplied with 10 x fixing channels, 20 x blank ends and 20 x punched ends (to accept cables). Additional fixing clips and end caps are available separately.
Note: Additional shipping costs will be charged if ordering less than a master pack (10 lengths).
|IP Rating||Not Applicable|
|Appx Lumens:||Not Applicable|
|Cut Intervals:||Not Applicable|
|LED Type:||Not Applicable|
|Average LED life Hrs:||50,000|
|CE and RoHS:||Yes|
|Equivalent to:||Not Applicable|
|Continuous Operation:||Not Applicable|