Our LEDTech range of solderless connectors is designed to make joining our uncoated LED tape products simple without the need to make soldered joints. This high-quality 10mm Solderless RGB Cross connector for LED strip lights key feature is a simple clip fitting for an easy wire to wire connection.
NOTE: Ensure that the LED tape is cut only at the clearly marked cutting points. Please also ensure that the copper or soldered tabs are showing before continuing with the wire joining.
Important: The copper tabs are protected with a layer of clear lacquer, before attaching the connector, carefully scrape away the lacquer to ensure a good connection.
Our range of strip to strip connectors have a compact design and are easy to implement into any indoor LED light installation. To use this solderless cable connector simply:
- Open the connector covers and insert the tapes to be joined into the slot on each side of the connector
- Ensure that the copper or soldered tabs are lined up with the tabs on the connector.
- Close the four connector covers making sure that they are firmly clipped into place and the locking tabs are latched
There are a couple of things to remember when using an LED strip light solderless connector. It is important that you do not daisy chain more than 5m lengths of LED flexible tape in one long line. Please ensure that you follow this rule when joining tape together otherwise the tape could overheat causing it to fail.
Our range of solderless tape connectors has a rating of IP20 so they are to be used in a dry environment when there is no exposure to moisture.
Our LED experts at LED Technologies can help you with your LED products and installations. For more information, please contact us by calling our technical sales team or sending an email or via live chat.