Available from our stunning range of Cordless LED Table Lamps. This Charging Trolley is our largest charging station for our LED table lamps. The Trolley can house up to 24 LED Lamps at one time. Due to the exposed LED Driver, this charging solution for the LED Lamps is intended for professional use only on commercial premises.
The charging trolley has raised pins on the individual charging trays. The trays are fixed to the shelves to secure the lamps in place while they are charging. Place the hole in the base of the lamp over the raised pin for a secure charge. This will prevent any accidental damage from moving the tray with the lamps on charge.
There are red light indicators situated in the middle of each tray to indicate if the charging tray is turned on. When you plug the trolley in via the Kettle Lead input at the bottom of the trolley, all the indicator lights will turn red. The lamps will also glow red while charging. When the cordless LED Lamps are fully charged, the light inside the lamp will turn green. Note: The indicator light will remain red as this is just an indication to show that the individual trays are powered.
The charging trolley is powered through an I.E.C connection (Kettle Mains Lead). The input for the kettle lead is situated at the back of the bottom shelf of the trolley. The wire connected to the top shelf will need to be fed through a wire hole in one of the trolley legs.
The LED Lamp charging trolley features lockable wheels to secure the unit in place and prevent accidental damage to the LED lamps while charging in a busy environment. There are latches above the back wheels that can be pressed down to lock the wheels, keeping the whole trolley in place.
A 5V Meanwell LED Driver (Product code: RSP200-5) is situated at the bottom of the trolley. The driver is exposed, meaning this unit is to be used indoors only to prevent any water from splashing the unit. This product is to be used by professionals only within the commercial sector. The wires on the cable leading down from the top shelf will need to be connected to the Meanwell driver before the unit can be plugged in.
The unit weighs around 6KG and is 770mm tall, 700m in length and 445mm wide.
Please Note: The charging trays & trolley options are not included with your purchase of the lamp. Each charging unit is sold separately. A charging method is required to operate the lamp.
