- NEW IN New
LED STRIP LIGHTS
- LED SIGNAGE
EXHIBITION & OUTDOOR LIGHTING
- LED DOWNLIGHTS
- LED CONTROLS
- LED DRIVERS
- LED PROFILES
This superb new "narrow gauge" LED Flex is an ideal product for use in the Model & Sign making industries. Due to its narrow width, short cutting points and the high number of LED’s /m, Model Maker is perfect for edge-lit signs, point of sale displays and in the construction of light panels.
The cool white light produced does not discolour printed graphics and so it can be used in light boxes and signage.Model Maker can also be fitted behind glass or acrylic shelving to edge light them. Light from the flex is then transmitted through the shelving creating a superb effect for use in bar and club installations. Model Maker is an uncoated (IP20 rated) product and so is not suitable for outdoor use and it is supplied on a 3m roll with pre-soldered tails.
Simply connect Model Maker to one of our range of 12v LED Drivers or if dimming is required, it can be controlled with our comprehensive range of RF Remote control systems, Dimmable Drivers or by DMX through our DMX 512 decoders.
|LED per mtr||120 p/Mtr|
|Guarantee Period||3 Years|
|Size:||5mm x 2.2mm x 3000mm Roll|
|Beam Angle:||120 degree|
|CRI Rating (greater than)||CRI 80|
|LED Type:||Led chip 3528|
|Continuous run in mtrs||5|
|Average LED life Hrs:||50,000|
|CE and RoHS:||Yes|
|Peelable Back||300LSE 3M Adhesive Tape|
|Base Type||Connector one end tails other|