This 200W, 24V, non-dimmable Meanwell constant voltage LED driver is an ideal product for professional installations and powering our 24v flexible LED lighting products. The driver has an IP rating of 20 so it is only suitable for indoor use. Also due to the exposed terminals, this type of LED driver works in well-ventilated areas where access to the driver is restricted to qualified electrical personnel only.
The LED light driver is supplied with wire tails on the input and output sides which need to be connected to a suitably rated junction box to maintain the IP67 rating. LED Technologies supply a range of waterproof gel cable connectors suited for outdoor installations.
IMPORTANT: We recommend that a driver should power products at approximately 75% of the value of the driver. The recommended load for this 200W unit is approximately 150W.
It is good practice to specify a driver with a capacity load of more than the product it is powering but it must not be connected to a load greater than the 75% tolerance of the driver otherwise this will shorten the life of the unit.
This constant voltage LED driver has an input voltage of 240V AC. Once the connected devices and lights have been set up, this LED lighting driver will provide an output of 24V DC voltage.
PLEASE NOTE: This specific LED Driver is only available to qualified electricians
Our wide variety of LED drivers can be used to power our LED strip lights, outdoor lights and other LED Lighting that requires a power supply with an output voltage of 24V DC.
Our LED experts at LED Technologies can help you with your LED products and installations. For more information, please contact us by calling our technical sales team, through email or via live chat.