This Fast latch lever wire connector is from LED Technologies. They are designed to effortlessly connect wires for LED lights such as single colour LED Strip lights/ LED tape. These create a wire to wire connection.
Features of Clip Connectors
These electrical wire connector clips are 13mm in length, 18.5mm in width and 9.7mm in height. This is a small compact LED light cable connector. It will minimise the amount of space required in junction boxes. It will also comfortably sit in our range of waterproof gel connectors.
They are compatible with a range of cables, allowing solid, stranded and fine stranded wires to be easily connected.
LED strip connectors have an Ingress protection rating of IP20. The 2 means that it is protected against solid objects over 12.5mm. For example, this would include touching. The 0 means that it has no protection against water.
Therefore they are not waterproof. They are ideal for quick and temporary indoor installations. However, if waterproof solderless connectors are required, they can be placed within gel connectors that will create a IP68 rating. This will be ideal for wiring in wet and damp environments such as pools or outdoors.
Read more about IP ratings and what they mean using our case study.
This LED light connector is a 2 pole power connector. It will ensure a tight clamp on electrical cables for LED lighting installations.
It features a clear housing to create clear visibility of the wires inside. You can then ensure that the wires are correctly installed.
Using and Installing Clip Connectors
Clip connectors are perfect for wire joining for indoor lighting projects. They enable wires to be quickly and securely connected. It can connect LED strip lights to drivers, receivers or extend wire lengths easily.
The electrical connectors are ideal for quick setup of lighting fixtures. They can be used both in commercial and domestic lighting. This eliminates the need for electrical wiring or soldering experience.
They are perfect for setting up LED lighting in your home in areas such as bedrooms, living rooms or hallways. They ensure that LED lighting is fast and easy to install.
They are also perfect for commercial spaces such as hotels, restaurants and retail outlets. They could even be used for stage lighting especially as the clips can be taken off and easily reused. This means you can change the lighting designs easily without having to buy multiple units of the same product.
For wet and damp environments such as pools, kitchens, bathrooms and outdoors, pair the connector with a gel connector.
Clip connectors are effortless to install. Simply place the wires in either end of the connector and press the orange tab to ensure a tight connection.
Note: Ensure the wires are connected to the corresponding wires. Carefully read the datasheet provided with the product you are wiring. You can also Read our case study on wiring strip lights or ring our technical sales team.
LED Technologies offer a wide range of LED products including:
Shop our range of products through our website or contact our technical sales team.