Shopping Basket
0 Items - £0.00
0 Items View Cart

You have no items in your shopping cart.

Dont have a trade account? Register today
Trade supplier of commercial LED Products
Speak to an LED expert today 01260 540014

Product was successfully added to your shopping cart.
Single Male Jack Plug to 30cm Tail

Single Male Jack Plug to 30cm Tail

(In stock)


Single Male Jack Plug to 30cm Tail

Order in ? hours ?? minutes ?? seconds to get this item on Friday 22nd February*

Availability: In stock

Quick Overview

This single male jack plug to twin cable lead is ideal for connecting a laptop type driver to single colour LED tapes or modules fitted with input tails.  Use this connector with our terminal block (100.683).  Note: Never connect more LED tape than the driver can power, we recommend running a driver at 75% of the rated output load.


This link lead simply plugs into your laptop style driver with fitted jack plug and the wire tails can then either be either soldered onto the LED tape or, when used in conjunction with our terminal block can joint onto the wire tails already soldered to the tape or module. 

Take care to observe the polarity of the cables and remember that a driver should only be loaded to 75% of its capable output so for example, a 100w driver can be loaded up to 75w.  Once the load has been established to be within tolerance, connect the male jack plug on lead to the female jack socket on the LED driver.  Then connect the tails to the LED tape. 


Product Code: 100.672
PCB Weight Not Applicable
Weight (g) 1.0000
CRI Rating (greater than) CRI 80
Dimmable: No
LED Type: Not Applicable
Average LED life Hrs: 30,000
CE and RoHS: No
Colour Temperature Variation IP20 No
Power Factor (greater than) Not Applicable
Wireless Range Not Applicable
Continuous Operation: Not suitable for 24/7 continuous use