This waterproof gel filled connector is available from LED Technologies. It is designed to provide a water tight wire connection. Outdoor lighting and underwater lighting effects can be achieved using this gel connector.
Features of the Gel Connector
The revolutionary 3 way gel filled wire connector is a small and compact solution for insulating and sealing common wire connectors. The waterproof connector is 19.4mm in width, 11.8mm in length and 8.2mm deep.
Refer to the data sheet provided with the product or online for detailed measurements.
It suitable to be used with 19-26 AWG (0.5mm - 0.14mm) air Core wires and 22-26 AWG (0.34mm - 0.14mm) filled cable.
This waterproof electrical terminal block comes pre filled with non toxic gel. There is no shelf life which ensures a durable and long lasting connector for LED lighting.
It is also halogen free and UV resistant making this an ideal outdoor lighting solution.
The gel outdoor connectors have an ingress protection rating of IP68. The 6 means that it is entirely protected from dust and touching. The 8 means that it is protected from long periods of immersion in water. This means that it is completely waterproof.
Read more about IP ratings using our case studies.
This product comes with 100 units per pack.
Placement of Gel Connectors
This waterproof LED connector is ideal for both commercial and domestic markets in wet and damp environments.
They are perfect for lighting in outdoor spaces such as gardens. The gel connector can be hidden underground or submersed in the water to enable a professional finish. Ideal for lighting in various places such as pools, ponds and water features.
The LED wire connector can also be used in indoor pools and wet rooms. This will enable you to achieve a contemporary and professional lighting whether it is at home or commercial spaces.
Read our case studies for a range of applications where gel connectors may be needed, such as this waterfall feature.
Installing Gel connectors
Simply place the wire connectors into the gel filled connector and close the lid. Pushing on the red section will release the gel forming a seal around the wires. This will create a water tight seal which can then be placed where required. This can be underground or submersed within water.
This gel connector is perfect for a range of waterproof lights and connectors.
LED Technologies offer a wide variety of products including:
Shop our range of products through our website or contact our technical sales team.