LEDTech RGB Wireless Receiver

This RGB RF LED receiver is designed to be used as part of a remote control colour-changing system. Our LEDTech Wireless RGB LED Controller (100.254) is made to work with this RF signal receiver.

This LED remote receiver will give control over our Tri-Colour (Red, Green & Blue) colour-changing products in a single zone. Any number of receivers can be paired to the transmitter and as the system is RF rather than infra-red. The receiver will operate within 20m of the transmitter and does not require a line of sight. 

The receiver will control radio frequency 12v or 24v Tri-Colour LED products over three output channels of 6A each (total output 18A maximum load).

The Input power can be connected to the V+ & V- input terminals on the green terminal block or via the male jack socket. The LED Product should be connected to the output V+, R, G & B terminals.

The receiver/controller has a memory that will return it to the last option selected should the power be removed. This makes it easier to keep your preferred colour setting on your LED tape and other LED lighting units.

Browse our range of LED strip lights that can be controlled with this Sunricher RF receiver. Sunricher products also include multiple receivers ranging from single-colour LED, RGB & RGBW colour-changing RF LED Light receivers. This receiver can be implemented into your home automation system for control through smart home hubs.

Quick Specs

• CRI Rating (greater than)CRI >80
• ColourRGB
• Input Voltage12V / 24V DC