Simply connect your 12v or 24v LED tape or module product to the + & - terminals on the terminal block on the male jack plug then plug it into the female jack socket fitted to our laptop style LED drivers.
Note: This cable connector does not give a splash proof connection however it is ideal for a quick and easy connection to our tapes and modules, enabling a plug and play solution. Driver does not have a female jack socket, look here.
Wire connector used in many lighting solutions with our range of Wires and LED Extension Cables. For a female connector simply connect your 12v or 24v output tails from your LED driver to the + and - terminals on the terminal block then plug the jack socket into the male jack plug fitted to most of our LED 5m tape rolls.
They have an IP rating of IP20 which can be used in a dry environment when there is no exposure to moisture. This does not give a splash proof connection however it is ideal for a quick and easy connection to our tapes and module products enabling a plug and play solution.
Take care to observe the polarity of the cables and remember that a driver should only be loaded to 75% of its capable output so for example, a 100w driver can be loaded up to 75w.
For product assistance please contact us by telephone, email or via our online live chat.