This high-quality "Five-in-One" multichannel receiver is available from our excellent MiLight product range. Using the onboard button displays, the unit can be adjusted to control single-colour, dual-white (CCT), tri-colour (RGB), quad-colour (RGBW) and RGBW+CCT 12V or 24V LED products.
DALI (stands for Digital Addressable Lighting Interface) / PWM receiver conforms to the following DALI protocols (IEC62386-102.207.209): DALI DT8, Tc and XY Coordinates. This controller boasts an impressive management system; able to control 5 types of LED lighting.
Each of these modes will take 1 x DALI address up to 5 x DALI addresses if you set the controller into RGB+CCT mode. Each channel is rated a 6A however the total combined load over all five channels should not exceed 15A maximum load. The controller will accept a constant voltage input of 12V or 24V DC (Direct Current).
There are additional connections for a "Push Dimming" function, simply connect a momentary switch to these terminals and you can switch or dim your lighting as required.
Note: The controller will automatically lock after 30 seconds if no buttons are pressed preventing accidental adjustment, to unlock simply press and hold the "M" button for 2 seconds.
This DALI lighting Control device is great for controlling any LED lighting system. Make sure your LED lighting is connected to a suitable power supply. Then wire the lights into your stylish DALI LED multi-channel receiver and enjoy full control over your LED lighting DALI system.
For more information on this product and control options, please contact our sales team. Call, email or use our online live chat to talk to our technical sales team.
Shop our range of LED Controls through our website or contact our technical sales team.