LED Strip Lights
- LED Floods
- LED Downlighters
The LedTech range of solderless tape connectors are designed to make joining our uncoated LED tape products simple without the need to make soldered joints. The connector is fitted with a 150mm pre-tinned tails which are colour coded for ease of connection.
To use the connector, first ensure that the LED tape is cut only at the clearly marked cutting points and that the copper or soldered tabs are showing.
Important: The copper tabs are protected with a layer of clear lacquer, before attaching the connector, carefully scrape away the lacquer to ensure good connection.
Open the connector and insert the tape into the slot ensuring that the copper or soldered tabs are lined up with the tabs on the connector. Close the connector ensuring that it is firmly clipped into place and the locking tab is latched.
Do not daisy chain more than 5m of LED tape in one long line, please ensure that you follow this rule when joining tape together otherwise the tape could overheat causing it to fail
|PCB Weight||Not Applicable|
|CRI Rating (greater than)||CRI 80|
|LED Type:||Not Applicable|
|Average LED life Hrs:||30,000|
|CE and RoHS:||No|
|Colour Temperature Variation||IP20 No|
|Power Factor (greater than)||Not Applicable|
|Wireless Range||Not Applicable|
|Continuous Operation:||Not suitable for 24/7 continuous use|