- NEW IN New
LED STRIP LIGHTS
- NEON FLEX
- LED SIGNAGE
EXHIBITION & OUTDOOR LIGHTING
- LED DOWNLIGHTS
- LED CONTROLS
- LED DRIVERS
- LED PROFILES
The LedTech range of solderless tape connectors are designed to make joining our uncoated LED tape products simple without the need to make soldered joints. This cross connector has a simple clip fitting but first ensure that the LED tape is cut only at the clearly marked cutting points and that the copper or soldered tabs are showing.
Important: The copper tabs are protected with a layer of clear lacquer, before attaching the connector, carefully scrape away the lacquer to ensure good connection.
Open the connector covers and insert the tapes to be joined into the slots on all sides of the connector ensuring that the copper or soldered tabs are lined up with the tabs on the connector. Close the four connector covers making sure that they are firmly clipped into place and the locking tabs are latched.
Do not daisy chain more than 5m of LED tape in one long line, please ensure that you follow this rule when joining tape together otherwise the tape could overheat causing it to fail.
|PCB Weight||Not Applicable|
|CRI Rating (greater than)||CRI 80|
|LED Type:||Not Applicable|
|Average LED life Hrs:||30,000|
|CE and RoHS:||No|
|Colour Temperature Variation||IP20 No|
|Power Factor (greater than)||Not Applicable|
|Wireless Range||Not Applicable|
|Continuous Operation:||Not suitable for 24/7 continuous use|