- NEW IN New
LED STRIP LIGHTS
- NEON FLEX
- LED SIGNAGE
EXHIBITION & OUTDOOR LIGHTING
- LED DOWNLIGHTS
- LED CONTROLS
- LED DRIVERS
- LED PROFILES
The LedTech range of solderless tape connectors are designed to make joining our uncoated LED tape products simple without the need to make soldered joints. The connector is fitted with a 150mm long pre-tinned tails which are colour coded for ease of connection.
To use the connector, first ensure that the LED tape is cut only at the clearly marked cutting points and that the copper tabs are showing.
Note: Some cutting points are soldered tabs and not copper tabs, it is perfectly acceptable to link to these as well.
Open up the plastic connector and insert the tape into the connector making sure that the copper or soldered tabs are lined up with the tabs on the connector. Close the connector ensuring that it is firmly clipped into place and the locking tab is latched down.
Important: Do not daisy chain more than 5m of LED tape in one long line, please make sure that you follow this rule when joining tape together otherwise the LED tape could overheat causing it to fail.
|PCB Weight||Not Applicable|
|CRI Rating (greater than)||CRI 80|
|LED Type:||Not Applicable|
|Average LED life Hrs:||30,000|
|CE and RoHS:||No|
|Colour Temperature Variation||IP20 No|
|Power Factor (greater than)||Not Applicable|
|Wireless Range||Not Applicable|
|Continuous Operation:||Not suitable for 24/7 continuous use|