This high quality ZIGBEE four channel Constant Voltage driver is from the Sunricher range. It uses the latest ZIGBEE 3.0 protocol enabling you to control your quad colour LED lights.
This ZIGBEE LED driver is the perfect domestic or commercial installation. It can be used in a wide range of areas, such as bedrooms, hallways or offices to extend your ZIGBEE network.
This ZIGBEE receiver enables control over your RGB channels, the W channel uses the CCT command.
The LED light controller can be operated with any ZIGBEE device such has ZIGBEE remotes or wall panels. This ZIGBEE controller enables you to wirelessly control a range of LED lighting. The ZIGBEE receiver can control products such as quad colour LED Tape / LED strip lights.
The ZIGBEE constant voltage controller supports "touchlink" commissioning and "find and bind" mode. This enables you to pair with other ZIGBEE lighting devices after it has been added to the same ZIGBEE network. You can also "find and bind" a Sunricher ZIGBEE remote control handset or wall panel directly to the controller without a ZIGBEE hub.
The ZIBEE controller requires 100v -240v AC power supply to operate. Then pair to your ZIBGEE network either through a ZIGBEE Hub or independent of a hub to operate.
This is the perfect installation for your smart home. You can then achieve LED control wirelessly through your phone or home automation network. To ensure a high safety performance worldwide the driver is UL, ENEC and TUV certified.