Uncompromised illumination across extended distances.

The ultimate low voltage drop solution for commercial and architectural projects.

Just how long is 50 Metres?

Our ProFlex Single Colour series runs up to 50 metres continuously.

smartphone

0 Smartphones

At 10cm each
edit

0 Pencils

At 20cm each
local_pizza

0 Pizza Boxes

At 50cm each
shopping_cart

0 Shopping Trolleys

At 1.25m each
sports_tennis

0 Badminton Courts

At 5m each
local_shipping

0 Lorry Trailers

At 5m each
directions_bus

0 Double Deckers

At 10m each

Single Colour Series

50 Metre Max Run • IP65 Nano Coated • 5.2W/m

2300K

2300K Warm White

Ultra Warm Glow

  • Run: 50m
  • Lumens: 533 lm/m
  • SKU: 102.256
View Product
2700K

2700K Warm White

Standard Warm

  • Run: 50m
  • Lumens: 445 lm/m
  • SKU: 102.201
View Product
3000K

3000K Warm White

Crisp Warm

  • Run: 50m
  • Lumens: 533 lm/m
  • SKU: 102.202
View Product
4000K

4000K Natural White

Daylight Neutral

  • Run: 50m
  • Lumens: 542 lm/m
  • SKU: 102.203
View Product
6000K

6000K Cool White

Clean White Output

  • Run: 50m
  • Lumens: 515 lm/m
  • SKU: 102.204
View Product

Tunable White CCT

40m Max Run • 2700K - 6500K • 10.5W/m

IP65 Nano CCT IP65

CCT Tunable IP65

Indoor & Sheltered

  • Run: 40m
  • Lumens: 995 lm/m
  • SKU: 102.207
View Product
IP67 CCT IP67

CCT Tunable IP67

Outdoor Ready

  • Run: 40m
  • Lumens: 695 lm/m
  • SKU: 102.208
View Product

RGBW Colour Series

40m Max Run • 4000K White • 12.5W/m

IP65 Nano RGBW IP65

RGBW (4000K) IP65

Dynamic Mixing

  • Run: 40m
  • Lumens: 606 lm/m
  • SKU: 102.155
View Product
IP67 RGBW IP67

RGBW (4000K) IP67

Outdoor Dynamic

  • Run: 40m
  • Lumens: 453 lm/m
  • SKU: 102.206
View Product

ProFlex in Action

Check out our Lesson In LED Video below to get a general overview of what the 48V Proflex can do for you.

Technical Specifications

Engineered for professional longevity and superior light quality.

Input Voltage

48V DC

CRI Rating

>90 Ra

Beam Angle

120°

LED Lifetime

50,000 hrs

PCB Weight

3oz

Guarantee

3 Years
ProFlex Series Type Power (W/m) Max Run (Single Feed) Cut Interval LED Density PCB Width
Single Colour Nano IP65 5.2W 50 Metres 100mm 120 LEDs/m 12.5mm
CCT Tunable Nano IP65 10.5W 40 Metres 100mm 240 LEDs/m 12.5mm
CCT Tunable Silicone IP67 10.5W 40 Metres 100mm 240 LEDs/m 14.0mm
RGBW Hybrid Nano IP65 12.5W 40 Metres 166.67mm 108 LEDs/m 12.5mm
RGBW Hybrid Silicone IP67 12.5W 40 Metres 166.67mm 108 LEDs/m 14.0mm

*All specifications carry a +/- 10% tolerance. Continuous runs are possible with a single power feed at one end.

frequently asked questions

Why should I use 48V LED Strip instead of 24V?

48V LED strips operate at a lower current, which significantly reduces voltage drop. This allows for much longer continuous runs (up to 50m) from a single power source, whereas 24V is typically limited to 10m before requiring another power feed.

What is the difference between IP65 Nano and IP67?

IP65 Nano is a thin, invisible coating that protects against dust and light splashes, ideal for indoor use. IP67 is a full silicone encapsulation that is completely waterproof, making it suitable for outdoor use.

Do I need special drivers for 48V LED tape?

Yes, a dedicated 48V DC Constant Voltage LED Driver is essential. Standard 12V or 24V drivers are not compatible and will not power the strip.

We stock a comprehensive range of 48V drivers designed for the ProFlex series:

  • LEDTech IP67 Series: 200W, 500W, & 700W Waterproof Drivers
  • Mean Well HLG Series: 240W, 320W, 480W, & 600W Professional Drivers

View our full range of 48V Drivers

Do I need to power the strip from both ends for a 50m run?

No. That is the primary advantage of the ProFlex 48V series. You can run up to 50m (Single Colour) or 40m (RGBW/CCT) from a single power feed at one end without noticeable brightness loss, saving significant installation time and cabling.

Can I cut the ProFlex 48V strip?

Yes, like standard LED tape, ProFlex has designated cutting points indicated by copper pads. Due to the 48V architecture, cut points are typically spaced further apart (e.g., every 100mm-125mm) than 24V tape. Always check the specific product SKU for the exact cutting interval.

How do I control or dim RGBW and CCT versions?

You will need a compatible controller rated for 12V-48V DC. We stock a huge range of control protocols including ZigBee, Wi-Fi, DMX, and RF.

For the ultimate smart home integration, we recommend the Matter-compatible ML5 MiBoxer 5-In-1 Controller.

Why choose Matter?

  • Multi-Platform Support: Works seamlessly with Apple HomeKit, Amazon Alexa, Google Home, and Samsung SmartThings simultaneously.
  • Reliability: Matter runs over Wi-Fi for fast, local control without relying solely on cloud servers.
  • Versatility: The ML5 controls Single Colour, CCT, RGB, RGBW, and RGB+CCT strips all in one unit.

Quick Specs (ML5): 5 Year Guarantee, IP20, 12V-48V Input.

A versatile choice for our 48V series is the PZ2 MiBoxer 2-In-1 Controller which supports smooth colour and brightness adjustment via App or RF handsets.

View our full range of 48V Controllers

Should I install this in an Aluminium Profile?

While 48V strips run cooler than lower voltage counterparts, we always recommend installing LED tape within an Aluminium Profile. This acts as a heat sink to prolong the lifespan of the LEDs and provides a professional, diffused finish to the light output.