Access your account by completing the following login form.

or
View Basket

LEDTech | 300W 24V LED Driver

Product Code: 100.525
  • Recommended load 225W
  • Ideal for powering our 24V products
  • 227 x 75 x 43mm
  • Highly efficient
The guarantee period is the length of time a replacement or refund will be issued if the product becomes faulty and all operating and installation requirements have been met.
This is the required amount of volts needed to power the product.
Currently in Stock
Next day delivery available*

In stock
Speak with an Expert
Speak with an Expert

Product Description

This 24V LED strip light driver is from LED Technologies. It is suitable to power our 24W Lifestyle or Proflex 24v products and LED tape lights.

 

24V LED lighting require a 24v LED power supply unit / LED driver / LED transformer. This will connect your lighting to a mains power supply.

 

A constant current LED driver is a power supply that regulates the voltage supply to a lighting product such as LED light strips.

To get the best performance out of your drivers, only load the driver to around 75% of the drivers' value. For example, a 100W driver should only run at 75W. Therefore this 300W driver should only be used for 225W or lower lighting fixtures.

Lighting transformers use a constant voltage for powering LED's. The LED light drivers total wattage should be more than the required wattage of the product. Different types of LED drivers will have different output voltages, make sure to select the correct constant voltage LED driver for the product you are powering.

 

This 24 volt driver is slim and compact, measuring 227mm wide, 75mm in length and 43mm in height. It is an ideal solution for powering LED lighting products.

This LEDTech driver has an IP rating of IP67. The 6 stands for complete protection against dust. The 7 means that it is protected against temporary immersion. This is between 15cm and 1M.

Therefore, this driver is waterproof and is suitable for indoor and outdoor lighting.

Read our case study on IP rating and what they mean for more information.

 

It is perfect for powering lights in indoor installations such as in your home in living rooms, bedrooms or hallways. They are also perfect for commercial spaces such as hotels or restaurants. The small compact design enables the LED tape driver to be easily hidden.

It is also suitable for wet and damp environments where the driver way become wet, such as swimming pools, kitchens and bathrooms. It can be installed outside as it can withstand weather such as rain or snow, perfect for powering garden LED lights.

The driver is supplied with input and output wire tails. These need to be connected to a suitably rated junction box such as our IP68 gel connectors. This will maintain the IP67 rating.

 

The driver features tabs that enable the driver to be drilled into place, whether on a wall, roof or underneath furniture such as shelves so that it it concealed.

To install the driver, effortlessly connect the output to the LED product and then connect to a suitable mains supply. It is a quick and easy set up.

 

Other Products

LED Technologies offer a wide range of high quality LED Drivers suitable for a range of LED products including

  • 12v Drivers
  • 36V Drivers
  • Waterproof Drivers
  • 300/350W Drivers

 

We also offer a huge selection of LED strip lights including

  • Single Colour
  • CCT adjustable
  • White
  • RGB colour changing
  • RGBW
  • Ultra Violet
  • Waterproof and non waterproof

 

Shop our range of products through our website or contact our technical sales team on 01260 540014.

LEDTech | 300W 24V LED Driver 100.525

Quick Specs

The guarantee period is the length of time a replacement or refund will be issued if the product becomes faulty and all operating and installation requirements have been met.
This is the required amount of volts needed to power the product.
Product Code: 100.525
Manufacturer LED Technologies
Product Type Controller / Driver
Colour Brushed Aluminium
IP Rating IP67 Waterproof
Guarantee Period
The guarantee period is the length of time a replacement or refund will be issued if the product becomes faulty and all operating and installation requirements have been met.
1 Year
PCB Weight Not Applicable
Power Consumption: 300w
Power Factor > 80
CRI Rating (greater than) CRI >80
Input Voltage
This is the required amount of volts needed to power the product.
240v AC
Size 227 x 75 x 43mm with 2 x Cables
Wattage 300w
Average LED life Hrs 30,000
Continuous Operation Not Applicable
Dimmable: No
LED Type Not Applicable
Datasheet-100.525 Download

We currently have no product FAQs, ask your question

Filters
Refine