For projects that require a reliable, compact connector to link your LED strip to another LED Strip with a wire bridge in between, this mini strip-to-strip bridge clip connector from our professional range of discrete connectors is the ideal solution. This connector is suitable for both 8mm Single COB and 8mm SMD type LED strips that require a 2 x Pin connection (single colour LED strips). The maximum load on this connector is 36V / 2.5A. The connectors have a wire bridge "link lead" forming a gap of 150mm from one strip to another, this is ideal for linking LED Strips together where a "strip to strip" type joint is not required. As the casing of the connector is clear, it allows light to pass through the body of the connector, this ensures minimal interference from the light output of your LED strip. Being small in size, the connectors can be easily incorporated into a small profile enabling you to hide the connector easily inside the profile as required.
The connectors are clamped into place on the LED Strip by gripping the connector firmly at the clip point and closing the connector around the LED Strip, take care to slide the LED strip into the connector body all the way so that the pins line up with the cut points on the LED Strip. Squeeze the connector closed firmly until it clicks into place.
Note: The connector will pierce the LED strip ensuring a firm grip onto the tape so it will not slide off, the electrical connection is also very firm so there is minimal voltage loss over the joint. Once the connector has been clamped onto the strip, it is not recommended to remove it as damage to the LED Strip will occur. If it is necessary to remove the connector, carefully insert a small flat headed screwdriver under the side clips to release them, care must be taken to avoid injury as it is easy to slip with the screwdriver. Once the connector has been used it is not advisable to use it again.
For more information on this or any of our connector range, please contact our technical sales team by phone, email or via live chat and WhatsApp on our website.
