This Sunricher RF 24v, 100w RF Driver will power and control your 24v LED products by wireless remote control, it is compatible with a variety of Sunricher remote control handsets and wall panels and works in 1, 2, 3 or 4 channel modes.  This is a high quality unit designed for installation purposes and has an integral 96w Constant Voltage 24v Driver.

For use with the Sunricher range of Modular 12v or 24v Drivers this blank module enables the driver to be used as a standard 12v or 24v driver without any control options.

This commercial grade Sunricher mains powered constant current DMX512 Driver has multiple output current settings ranging from 250mA to 1,500mA, these are easily adjustable with dip switches making this device compatible with various Constant Current output loads and suitable for connecting to any DMX512 control system.

This single colour DALI push button wall panel enable you to switch “On / Off” or adjust the intensity one DALI group of single colour LED products, (16 DALI groups are selectable).  As the wall panel takes its power from the DALI BUS there is no need for an external power supply.

This slim single channel Sunricher RF to Phase Cut AC Dimmer will enable you to power on /off and dim your AC mains powered LED products from a compatible Sunricher SR2501 Series RF handset or wall panel.
Note: This single channel dimmer is designed for professional installation purposes only. It requires a 100v - 240v AC power source and must be paired to a compatible RF transmitter (available separately).

This stylish RF RGB wall panel is ideal for installations where it is not possible to run cables from the wall panel to the controller or provide a power source for the wall panel.  Supplied with a long-life button battery the wall panel works wirelessly with compatible Sunricher SR1009 series RGB receivers.

This stylish RF RGB wall panel is ideal for installations where it is not possible to run cables from the wall panel to the controller or provide a power source for the wall panel.  Supplied with a long-life button battery the wall panel works wirelessly with compatible Sunricher SR1009 series RGB receivers.

This slim five channel Sunricher Constant Voltage DMX decoder enables control of your Constant Current LED products by DMX512 protocols. The unit can be set to 1, 2, 3, 4 or 5 channel operation and the PWM frequency and dimming curve is adjustable. This is a high-quality unit designed for installation purposes and requires a 12v, 24v or 36v constant current driver to provide a power source.

This slim four channel Sunricher Constant Voltage DMX decoder enables control of your Constant Voltage LED products by DMX512 protocols. The unit can be set to 1, 2, 3, 4 or 5 channel operation and the PWM frequency and dimming curve is adjustable. This is a high-quality unit designed for installation purposes and requires a 12v, 24v or 36v constant voltage driver to provide a power source.

This high quality, remote controlled, constant current two channel LED driver, is an ideal product to switch and control your constant current, colour temperature adjustable LED products up to a maximum load of 50w. When paired to a compatible Sunricher RF dual colour handset or wall panel, all the associated features can be used to control the driver.

This high quality, remote controlled, constant current single channel LED driver is an ideal product to switch and dim your constant current LED products up to a maximum load of 50w. When paired to a compatible Sunricher RF single colour handset or wall panel, all the associated features can be used to control the driver.

This compact high voltage RF controller enables full control over your mains powered RGB LED strip lights by remote control. When paired to a compatible Sunricher RF handset or wall panel, all the associated features can be used to control the LED strip.

As part of our Sunricher range of LED control products, this single channel "close up" IR switch is designed to switch a single colour LED or halogen product when the PIR motion sensor is activated.  Once activated it will stay on until movement is detected one more. This compact but reliable PIR switch is ideal for installing in walk in cupboards or even furniture as it will switch on the LED light when the sensor detects movement.  Works with low voltage products from 12v to 36v DC.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher remote control handset can be incorporated into a ZIGBEE network and will connect to any other ZIGBEE product as part of a network of devices to control single colour, dual colour (CCT) and RGB LED products.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher RGB & CCT colour changing constant voltage controller can be incorporated into a ZIGBEE network and will connect to any other ZIGBEE product as part of a network of devices to control your RGB and colour temperature adjustable LED products.

ZIGBEE is the standard protocol used to control ZIGBEE enabled products as part of a home automation system.  It is supported by many popular home automation products such as Amazon Echo, Philips Hue, Google Home and also through the Philips Hue Hub it can be used with Apple Home kit.

This high quality Sunricher In-Wall ZIGBEE AC switch can be incorporated into such a network and will connect to any other licenced ZIGBEE product as part of the ZIGBEE network of devices to switch on and off your mains powered products.  This switch works with both resistive and capacitive loads and does not require a neutral lead connection.