Access your account by completing the following login form.

View Basket

2 Pin Strip to Strip Clip Joint for IP20 Single Colour 8mm COB & SMD Strip Pack of 5

Product Code: 400.003
  • 2 x pin 8mm LED strip to Strip clip joint
  • Suitable for both COB & SMD LED Strips
  • Max load 36V / 2.5A
  • Fast connection to LED Strip
  • Allows a close-fitting joint between strips
  • Just 10mm wide and 5mm deep
  • Suitable for fitting into small profiles
  • Firm mechanical & electrical connection
  • Pack of 5 Connectors
IP Rating 20
Currently in Stock
Next day delivery available*

In stock
Speak with an Expert
Speak with an Expert

Product Description

For projects that require a reliable, compact connector to link your LED strip to another LED Strip with a close fitting type joint, this mini strip to strip clip joint connector from our professional range of discrete connectors is the ideal solution. This connector is suitable for both 8mm Single COB and 8mm SMD type LED strips that require a 2 x Pin connection (single colour LED strips). the mximum load on the connector is 36V / 2.5A. The connectors enable a close fitting "Strip to Strip" type joint from one strip to another, this is ideal for linking LED Strips closely together. In addition, as the casing of the connector is clear, it allows light to pass through the body of the connector, this ensures minimal interference from the light output of your LED strip. Being small in size, the connectors can be easily incorporated into a small profile enabling you to hide the connector easily inside the profile as required.

The connectors are clamped into place on the LED Strip by gripping the connector firmly at the clip point and closing the connector around the LED Strip, take care to slide the LED strip into the connector body all the way so that the pins line up with the cut points on the LED Strip. Squeeze the connector closed firmly until it clicks into place.

Note: The connector will pierce the LED strip ensuring a firm grip onto the tape so it will not slide off, the electrical connection is also very firm so there is minimal voltage loss over the joint. Once the connector has been clamped onto the strip, it is not recommended to remove it as damage to the LED Strip will occur. If it is necessary to remove the connector, carefully insert a small flat headed screwdriver under the side clips to release them, care must be taken to avoid injury as it is easy to slip with the screwdriver. Once the connector has been used it is not advisable to use it again.

For more information on this or any of our connector range, please contact our technical sales team by phone, email or via live chat and WhatsApp on our website.

Quick Specs

IP Rating 20

What's in the box?

1 x Pack of 5 x 8mm Clip to Clip Joint Connectors
Product Code: 400.003
Product Packed Anti static Bag
Product Type Connectors
IP Rating IP20 Non-Waterproof
Current 2.5A
Dimmable: No
Connection Type Strip to Strip
Pin Connectors 2-Pin
Suitable Strip Width IP20 8mm

We currently have no product FAQs, ask your question