2 Pin Strip to Strip Bridge Clip Connector for IP67 Single Colour 10mm (Inner) 12mm (Outer) SMD & COB Strip Pack of 5
- IP67 Rated Strip to Strip Bridge Clip Connector
- Suitable for 12V & 24V LED Strips
- For IP67 rated COB & SMD LED type strips
- Max load 36V 5A
- 2 x pin LED strip to Strip bridge clip connector
- For 10mm (inner) 12mm (outer) LED Strips
- Fast connection to LED Strip
- With fitted 180mm bridge link cable
- No Soldering required
- Connector dims (18mm Wide x 10mm Deep)
- Secure mechanical & electrical connection
- Pack of 5 Connectors
*We will endeavour to ship on time. Bulk/complex orders may ship the following working day.
Product Description
When you require a reliable, IP67 rated, compact connector to link your LED strip to another LED Strip with a wire bridge in between, this mini strip-to-strip bridge clip connector from our professional range of discrete connectors is the ideal solution. The connector is suitable for 2 pin, (single colour), IP67 rated COB and SMD type LED strips with an inner strip width of 10mm and an outer coated width of 12mm. The connectors are rated at Max load 36V 5A and have a wire bridge "link lead" forming a gap of 180mm from one strip to another, this is ideal for linking LED Strips together where a seamless joint is not required. The outer dimensions of the connector are 18mm Wide x 10mm Deep so they can be incorporated into a profile enabling you to hide the connector inside the profile if required.
The connectors are clamped into place on the LED Strip by sliding the transparent part of the connector over the LED Strip and then joining the two together, gripping the connector firmly at the clip point and closing the connector around the LED Strip, take care to slide the LED strip into the connector body all the way so that the pins line up with the cut points on the LED Strip. Squeeze the connector closed firmly until it clicks into place.
Note: The connector will pierce the LED strip ensuring a secure grip onto the tape so it will not slide off, the electrical connection is also very secure so there is minimal voltage loss over the joint. Once the connector has been clamped onto the strip, it is not recommended to remove it as damage to the LED Strip will occur. If it is necessary to remove the connector, carefully insert a small flat headed screwdriver under the side clips to release them, care must be taken to avoid injury as it is easy to slip with the screwdriver. Once the connector has been used it is not advisable to use it again.
For more information on this or any of our connector range, please contact our technical sales team by phone, email or via live chat and WhatsApp on our website.
Quick Specs
- IP RatingIP67 Waterproof
What's in the box
- 1 x Pack of 5 x 10mm 2 x Pin IP67 Rated Bridge Clip Connectors
Technical Specification
- Product Code: 400.248
- Product Packed Poly / Anti static Bag
- Product Type Connectors
- IP Rating IP67 Waterproof
- Current 5A
- Dimmable: No
- Connection Type Strip to Strip
- Pin Connectors 2-Pin
- Suitable Strip Width IP67 10mm (Inner) 12mm (Outer)
Product Datasheets
- Datasheet - 400.248 Download