MiBoxer 3W Mini Downlighter

Compact 12V spotlights for accent lighting

The MiBoxer 3W Mini Downlighter range provides a focused 36-degree beam in a compact aluminium fitting with orange spring clips. Choose fixed white, tunable white, RGB or RGBW to suit cabinetry, shelving, media walls and architectural features. The IP66-rated construction supports suitable indoor and outdoor installations when the fitting and all connections are installed correctly.

Choose your lighting option

• SL112: Fixed white, 1800-2200K. A very warm white output for atmospheric accent lighting.
• SL113: Fixed white, 3900-4100K. A neutral/daylight white output for crisp architectural and display lighting.
• SL212: Tunable white (CCT), 1800-6500K. Adjustable white colour temperature with a compatible CCT controller.
• SL312: RGB. Colour-changing red, green and blue channels; a white colour-temperature rating does not apply.
• SL412: RGBW, 1800-2200K white channel. RGB colour mixing plus a separate very warm white LED channel.

Only these five control-type and colour-temperature combinations are available. The exact white ranges above identify the supplied versions; RGB colours are selected through a compatible RGB or RGBW controller.

Features

• 3W nominal power per light
• 12V DC supply
• Focused 36-degree beam angle
• Compact aluminium housing with silver finish
• Approximately 42mm bezel diameter, 52mm overall width including clips and 36mm height
• 33-36mm installation cut-out, as shown in the manufacturer instructions
• IP66 rating
• Spring-clip mounting and modular plug connections
• Dimming with compatible control equipment
• Up to 20 compatible downlights linked in the manufacturer connection arrangement
• Five-year guarantee

Cables, power and control

Use the correct starter and extension cables for the selected version: 2-core for SL112 and SL113 fixed white, 3-core for SL212 tunable white, 4-core for SL312 RGB, and 5-core for SL412 RGBW. Match the controller output type and connector wiring to the chosen downlighter. Do not interchange cable or controller types.

A suitable 12V DC power supply and matching LED controller are required for the controlled system. Allow sufficient capacity for the total connected load, the selected controller and cable arrangement. The manufacturer's maximum is 20 linked lights; use additional suitable feeds or separate runs where required.

Wireless operation depends on the separate controller and its compatible remote or wall panel. The downlighters themselves connect by cable and do not contain an integral wireless receiver.

Starter cables, extension cables, controllers, remotes, power supplies and additional lights are sold separately.

Installation

Follow the manufacturer wiring diagram and cut-out guidance. Disconnect the supply before making connections, keep polarity and channel connections correct, raise the spring clips and insert the fitting into the prepared opening. Maintain space for heat dissipation and do not cover or wrap the metal housing with insulating materials.

For outdoor or moisture-prone locations, protect all connections and cut ends appropriately. Check the installation requirements for the location before fitting.

Photometric information

Light output varies with version and selected channel or colour-temperature setting. The supplied light-source reports record individual test conditions, including a blue-channel RGB test and 2758K white samples. Those sample measurements do not replace the selected product's nominal 3W rating or the white colour-temperature ranges listed above.

What is supplied

One MiBoxer 3W mini downlighter in the selected control type and colour temperature, with its attached modular connection leads and instruction manual. Other system components are supplied separately.