Seamless. Dot-free. Architectural.
Silicone Neon Flex.Beautifully Out of Line.
Turn a routed channel into a seamless line of light. Flexible silicone diffusers for interiors with a little more imagination.
Designed to become part of the architecture
01 / The Difference Is in the Detail
The Light Stands Out.
The Light Stands Out.
The Profile
Blends In.
FlushEmbedded finish
9Profile options
5 / 50 mRoll lengths
A clean line of light, built into the surface. Silicone neon flex diffusers bring a softer, more sculptural finish to architectural detailing and bespoke joinery within thoughtfully considered interiors.
-
One continuous glow
Opal silicone blends the light from compatible COB or high-density LED strips (≥120 LEDs/m) for a smooth, dot-free effect across the complete illuminated run.
-
Push in. Sit flush.
Ribbed sides grip the routed channel. Press the diffuser into place for a neat finish without a bulky visible extrusion along every carefully finished edge.
-
A material made to last
UV-stable silicone resists yellowing. Check the profile and complete lighting system specifications for your application and its intended installation environment.
02 / Choose Your Line
Small Detail.
Small Detail.
Big Difference.
From fine lines to wider statements. Choose your dimensions and finish, then select a 5 or 50 metre roll for your complete lighting project.
The Profile in detail
Select any product row to inspect it here. Dimensions are nominal: check the product drawing before routing your channel.
9 profiles · all available in 5 & 50 metre rolls
20 × 20 mm
Trimless · Black Silicone Neon Flex Diffuser102.236 (5M) & 102.236L (50M)20 × 20 mm
Winged · White Silicone Neon Flex Diffuser102.230 (5M) & 102.230L (50M)20 × 20 mm
Winged · Black Silicone Neon Flex Diffuser102.232 (5M) & 102.232L (50M)20 × 20 mm
Winged · Grey Silicone Neon Flex Diffuser102.233 (5M) & 102.233L (50M)10 × 10 mm
Specialty · White Silicone Neon Flex Diffuser102.309 (5M) & 102.309L (50M)12 × 12 mm
Specialty · White Silicone Neon Flex Diffuser103.320 (5M) & 103.320L (50M)16 × 16 mm
Specialty · White Silicone Neon Flex Diffuser102.231 (5M) & 102.231L (50M)30 × 20 mm
Specialty · Wide Format Neon Flex Diffuser102.234 (5M) & 102.234L (50M)Which edge
is right for you?
Trimless / a minimal edge
A streamlined 20 × 20mm profile that sits flush. The clean choice when the routed edge is part of the finished detail.
Winged / a forgiving finish
A top flange overlaps the routed edge, concealing small imperfections for a crisp transition into the surface.
03 / A Different Atmosphere
Give the Room
Give the Room
Its Own Signature.
Design inspiration for reception desks, hotel rooms, bars, restaurants, homes, corridors and feature walls. Illustrative applications; specify each installation individually for every distinctive lighting project.
1 / 18
04 / Directional Flexibility
Let Your Design
Let Your Design
Take a Turn.
Sweep around a feature. Follow a wall. Trace a gentle arch. Flexible silicone opens up forms that rigid profiles cannot follow.
MaterialUV-resistant silicone
Bending directionUp/down or left/right,
depending on orientation
depending on orientation
Profile movementOne axis at a time
Minimum bend radiusCheck the selected profile’s guidance
Plan broad curves and avoid twisting or sharp folds. Confirm the bending limits before routing a curved channel throughout the entire planned installation.
05 / From Channel to Finished Detail
A Flush Finish.
A Flush Finish.
A Considered Installation.
See the range in action, then follow the key steps to bring your own line of light to life.
Product range overviewLED Technologies / 01
Step-by-step installationLED Technologies / 02
-
Prepare the channel
Route your surface to the chosen profile’s drawing, allowing for any heat sink. Keep the channel clean and free of dust.
-
Plan for heat
Use a suitable aluminium heat sink where required by your LED strip and diffuser. The 10 × 10mm profile guidance recommends one above 10W/m; check the requirement for your chosen model.
-
Fit the LED strip
Adhere a compatible LED strip to the prepared base or heat sink. For curved runs, consider SideWinder bendable LED tape.
-
Press in the diffuser
Cut the silicone cover to length and press it over the strip. The ribbed sides grip the channel, holding the diffuser in place for a flush finish.
06 / Complete the Curve
A Flexible Diffuser.
A Flexible Diffuser.
Meet Its Perfect Partner.
SideWinder bendable LED strips follow intricate shapes and corners, with bends up to 90°. An adhesive backing makes fitting straightforward.
Colour examples · IP20 LED strip · Match strip width to your diffuser
07 / Before You Specify
The Finer
The Finer
Details.
A little planning makes all the difference. Start with the profile, then build the lighting system around it from the very beginning.
View All Silicone ProfilesIs this a complete LED light?
These products are silicone diffusers for LED strips. Plan the diffuser, compatible LED strip, power supply and any controls as a complete system. Choose your profile first, then check its product page for strip compatibility and installation Details.
How do I achieve a dot-free finish?
The opal silicone blends the LED output into a continuous line. Pair it with a suitable COB tape or a high-density strip with at least 120 LEDs per metre, and check the strip fits the chosen profile. The finished effect also depends on the LED-to-diffuser spacing and your installation.
Which profile should I choose?
Choose a standard 20 × 20mm trimless profile for a minimal flush edge. A winged 20 × 20mm profile has a top flange that overlaps the routed edge. Specialty sizes include 10 × 10mm, 12 × 12mm, 16 × 16mm and 30 × 20mm. Compare all nine profiles and check the dimensional drawing before routing.
Can the diffuser bend around a corner?
Use gentle curves, with up/down or left/right bending according to the profile orientation. Bend on one axis at a time; do not force sharp corners or twist the profile. Check the selected product’s bending guidance before setting out the channel. For a curved LED run, explore SideWinder bendable LED strips for smooth directional illumination.
Do I need an aluminium heat sink?
Higher-power LED strips need appropriate heat management. The 10 × 10mm diffuser product page recommends an aluminium heat sink above 10W per metre. Check the chosen diffuser and strip specifications for the correct requirement, and allow for the heat sink when planning the channel.
Is it suitable for splash-prone areas?
The silicone diffuser is described as IP65 splashproof. This does not establish the rating of the complete lighting installation: the LED strip, connections and sealing must suit the intended location. SideWinder strips are IP20, so they should not be treated as a waterproof lighting system.
Can I cut the roll to the length I need?
Yes. The diffusers are available in 5 metre and 50 metre rolls and can be cut to the required length. Cut the LED strip only at its specified cutting points and follow the installation instructions for both components.
Need Help Specifying Your Neon Flex?
For custom shapes, specialist finishes or technical advice for complex neon flex projects, our team is here to help.