Shape it. Secure it.
Bend left or right to follow your design. The supplied locking plate holds the chosen curve, helping the profile retain its form once positioned.
Architectural lighting / Aluminium profilesDesigned around your next project
Form follows imagination
Bendable LED profiles.Beyond straight lines.
Bring a new dimension to architectural lighting. Shape solid-walled aluminium into precise curves, with suspended and recessed profiles designed to follow your vision.
- 35 × 35 mm
- Precision square section
- 400 mm
- Minimum bend radius
- 24 mm
- Maximum LED strip width
- 2 ways to mount
- Suspended or recessed
01 / Design possibilities
Let the architecture
Let the architecture
lead the light.
Curved ceilings, open spaces and considered interiors deserve lighting that belongs. Bendable aluminium LED profiles give designers a way to carry light through a space with a deliberate, continuous form.
A statement in space.
Define reception areas, meeting spaces and retail interiors with suspended curves. Fine suspension wires allow the illuminated shape to become a focal point above the activity below.
Explore suspended profiles
Part of the architecture.
Integrate light into ceiling details for a quieter finish. Recessed profiles suit hospitality spaces, contemporary workplaces and residential interiors where the line of light takes the lead.
Explore recessed profiles
Aluminium that works.
The solid-walled aluminium channel supports your LED tape and helps dissipate heat. A purposeful housing with a clean, brushed finish.
A considered finish.
A flush-fitting opal diffuser softens the appearance of the light, while end caps complete the profile. The detail matters as much as the overall form.
02 / Choose your profile
One profile language.
One profile language.
Two distinct expressions.
Both options share a 35mm square section, a 2 metre length and space for LED strips up to 24mm wide. Choose the mounting method that best suits the architecture.
102.175 / Suspended
Suspended LED profile
A sculptural line of light for open spaces, with a complete wire suspension kit.
- Product code
- 102.175
- Profile section
- 35 × 35mm
- Length
- 2 metres
- Mounting
- Suspended
102.176 / Recessed
Recessed LED profile
A refined line of light within the ceiling, with a complete spring mounting clip kit.
- Product code
- 102.176
- Profile section
- 35 × 35mm
- Length
- 2 metres
- Mounting
- Recessed
03 / The technical detail
Creative freedom.
Creative freedom.
A precise specification.
Plan your curve, check your tape width and select your mounting method. The shared dimensions make it easier to specify a consistent profile across suspended and recessed details.
| Material & finish | Brushed aluminium |
|---|---|
| Profile section | 35mm × 35mm |
| Supplied length | 2 metres |
| LED strip width | Up to 24mm |
| Bend direction | Left and right |
| Bend limit | 400mm radius / 800mm diameter |
| Diffuser | Flush-fitting opal diffuser |
Included accessories
The finishing details,
The finishing details,
already considered.
Each profile is supplied with the components below, plus the mounting kit for your chosen version. Select a compatible LED strip, power supply and controls to complete the lighting system.
Get help matching your components- Opal diffuserA flush finish over the LED tape.
- End capsA tidy finish at each end of the profile.
- Locking plateSecures the profile’s formed curve.
- Flexible blackout stripHelps prevent unwanted upward light spill.
04 / From specification to installation
See how the
See how the
design takes shape.
Watch the installation guide for your chosen profile before you begin. See the forming and fitting process, and understand how the supplied mounting components work together.
102.175 / Suspension mounting
Explore the wire suspension system and fitting process.
102.176 / Recessed mounting
Understand the spring clip system for a recessed installation.
Before you specify
The details
The details
that make it work.
A few practical answers to help you choose the right bendable aluminium LED profile for your project.
How tightly can the profile bend?
Both profiles have a stated bend limit of 400mm radius, equivalent to an 800mm diameter. They can bend left or right. Consult the product datasheet and installation video when planning and forming your curve.
Which mounting option should I choose?
Choose 102.175 for suspended lighting, supplied with a wire suspension kit. Choose 102.176 for recessed lighting, supplied with spring mounting clips. Your ceiling design and intended visual effect will guide the choice.
Which LED strip will fit inside the profile?
Both profiles accommodate LED strips up to 24mm wide. Width is one part of the specification: also check the tape’s bending direction, power requirements and suitability for the intended curve. Our team can help match the components to your design.
What is included with each 2 metre profile?
Each version includes an opal diffuser, end caps, a locking plate, flexible blackout material and its corresponding mounting kit. Plan the LED strip, power supply and controls as part of your complete lighting specification.
Can you help with a bespoke lighting project?
Yes. Explore our bespoke manufacturing services or contact the team to discuss your drawings, dimensions and mounting requirements.
Your next lighting detail
starts with the right profile.
Chat is unavailable. Call 01260 540014 or email support@ledtechnologies.co.uk.
Explore All Aluminium Profiles
Discover our complete collection of architectural aluminium channels. Engineered to house and protect your LED tape, our wider range ensures the perfect fit for any bespoke lighting project.
Explore The Full Collection