LED Technologies Snap-O-LED Wardrobe bundle comes as a complete set with 1 x 565mm Pieces of snap-o-LED, power supply, Door Sensor, cables, connectors to power it all up. Everything you need!
Included with this professional package is our Sunricher ™ Door sensor, this unit is a perfect method of control to go with our Snap-O-LED.
With its sleek, compact design this LED light bar is ideal for installation into furniture units for example Wardrobes and cupboards. Snap-O-LED is fully dimmable when connected to our comprehensive range of LED control solutions.
Also included free in this Pro Bundle is 20 minutes of technical installation support so when installing If you need any help or have any questions a member of our technical team is just at the other end of the phone during office hours 01260 540014.
Whilst this bundle is superb value and suits many applications, we can customise and design a bundle to suit your needs based on any drawings or pictures you would like to send to us.
Why not let us plan your kitchen, lounge, bedroom or more, all completely free. From start to finish Led Technologies are here for you.
Products included:
1 x Light Bar - Snap-O-LED™ 565mm 4000K 24v CRI90 - View full product page
Snap-O-LEDs unique click and connect system allows you to connect up to 10metres* in one line with only one 24v power source, This gives you the flexibility to easily change your design in the future as well as removing the reason to cut, re-join & solder.
1 x Start Cable - Snap-O-LED™ Starter Cable 1mtr - View full product page
This Snap-O-LED 1mtr starter cable provides power to the first LED Light bar in your installation. Connect the starter cable to a suitable 24V driver and you have enough current to power up to 10meters in one line using our rigid connectors.
1 x Fixing Clips - Snap-O-LED™ Fixing Clips 5pcs - View full product page
This pack of 5 fixing clips can be used to easily mount any of our Snap-O-LED Linear light bars on to a flat surface (15mm x 10mm x 5mm)
1 x Power supply - LEDTech LED Driver 30W 24V 1.25 Amp IP67 - View full product page
This IP67 rated constant voltage 24v, 30w, 1.25Amp installation style LED driver is an ideal product for powering our 24v LED products and it is suitable for use in wet or damp environments such as swimming pools, kitchens or bathrooms. The driver is supplied with wire tails on the input and output sides which need to be connected to a suitably rated junction box to maintain the IP67 rating.
1 x Movement Sensor - Sunricher IR Close-up Door Sensor (Low voltage) - View full product page
This Sunricher single channel motion sensor switch is a professional quality IR device capable of switching single colour low voltage LED lighting products. When the IR sensor detects movement such as a door opening it will switch on the LED light, when when further movement is detected this will switch off the light.
2 x Connectors - 2 Pole - Fast Latch Lever Connector - View full product page
1 x 20 minute technical support & installation assistance - View full product page
