- NEW IN New
LED STRIP LIGHTS
- NEON FLEX
- LED SIGNAGE
- LED FLOODS
- LED DOWNLIGHTS
- LED CONTROLS
- LED DRIVERS
- LED PROFILES
The Data Amplifier allows multiple sets of LED products to be synchronise together from one data source by copying the signal from the data source and repeating it to another set of LED products.
The data repeater can be used with any of our range of four channel receiver / controllers or DMX decoders enabling multiple 12v or 24v LED lighting products of up to four channels (6A / Channel) maximum output load of 24A, to be synchronised together from a single controller.
It is very easy to use, just link the data repeater to your controller, connect a suitable driver and your LED product as detailed in the manual. The data repeater will then copy the input signal taking the power from the attached driver and not from the controller.
Note: It is possible to connect this data repeater to three channel controllers from other manufacturers.
|Product Type||Data Amplifiers|
|IP Rating||Not Applicable|
|Power Consumption:||Not Applicable|
|Power Factor (greater than)||80|
|CE and RoHS:||Yes|
|CRI Rating (greater than)||CRI 80|
|Input Power:||12 / 24v|
|Size:||115 x 64 x 24mm|
|Average LED life Hrs:||50,000|
|Continuous Operation:||Not Applicable|