LED Strip Lights
- LED Floods
- LED Downlighters
This particular extrusion has a flat profile with a tall three sided opaque diffuser and it is suitable for installing our 13mm wide IP67 rated (coated) LED tape product, however the extrusion will accept products up to 17mm in width. The special diffuser supplied with this extrusion is designed to minimise or eliminate pixilation from the LED's.
Simply fix the extrusion into place using the included fixing clips and then stick the tape into the extrusion. For ease of installation, the opaque diffuser is a clip on type so can be attached after the extrusion is clipped into place.
This extrusion is master packed in units of 25 x 1m lengths and is supplied with 50 x fixing clips, 50 x blank ends and 50 x punched ends (to accept cables). Additional fixing clips and end caps are available separately.
Note: Additional shipping costs will be charged if ordering less than a master pack (25 lengths).
|IP Rating||Not Applicable|
|Guarantee Period||1 Year|
|Appx Lumens:||Not Applicable|
|CRI Rating (greater than)||CRI 80|
|Cut Intervals:||Not Applicable|
|LED Type:||Not Applicable|
|Average LED life Hrs:||50,000|
|CE and RoHS:||Yes|
|Equivalent to:||Not Applicable|
|Continuous Operation:||Not Applicable|