LED Strip Lights
- LED Floods
- LED Downlighters
This bendable extrusion has a flat profile and is only suitable for use with our range of IP20 rated (uncoated) LED tape products up to 12mm in width. The minimum bending curve on the extrusion is 300mm, it can be bent forward or backwards (roller coaster style), it is not designed to be twisted.
Simply fix the extrusion into place using the fixing clips included and then stick the tape into the extrusion. For ease of installation, the opaque diffuser is a clip on type so can be attached after the product is installed. The extrusion may be cut using a sharp hacksaw, we recommend that the extrusion is installed with any cutting and bending done prior to installing the LED tape product.
This extrusion is master packed in tubes of 5 x 2m lengths and is supplied with 20 x fixing clips and 10 x end caps. Additional fixing clips and end caps are available separately.
Note: This product is only available in packs of 5 x 2m lengths due to packaging and shipping.
|Size:||6 x 18mm|
|CRI Rating (greater than)||CRI 40|
|LED Type:||Not Applicable|
|CE and RoHS:||Yes|
|Materials||Die Cast Aluminium|