LED RGB Strips
Setup Schematic RGB Controller / Zoner.pdf Setup Schematic RGB Data Hub.pdf ProFlex_Overview.pdf	Setup Schematic RGB RF Remote Control.pdf Setup Schematic SIngle Colour 12v & 24v Flex.pdf ProFlex_Installation_Notes.pdf
Touch Sensitive Colour Dial Manual.pdf Setup Schematic Options.pdf	Ribbon Overview RGB Proflex is an impressively bright, colour changing LED lighting solution designed to give a smooth colour changing wash to areas where flexibility is the primary requirement. Ideal for installations, ProFlex can be cut and joined and is IP65 rated with a 3M sticky backing to fix to most surfaces. The Tri-Colour LED’s give smooth rich vibrant colour mixing and dimming from 0 - 100% with negligible drop out at 0%. Specifications Ribbon 24v Power input to avoid voltage drop 60 x Tri-Colour LED’s / metre 14.4W light output / metre Cutting / joining points every 10cm Silicone coated for protection and IP65 rated for outdoor / indoor use 3M sticky backing Flexible Supplied in 5m rolls (Max Run Length 5m without RGB Amplifier) Dimensions per roll 5mtr x 13mm x 3mm

Setup Schematic Options.pdf Manual.pdf	LED (RGB) DMX Controller / Zoner This superb LED RGB Controller / Zoner can control up to 20m of ProFlex or 6 X LED RGB Light Panels. The unit has a built in DMX Controller and can be linked together with other controllers using 3 pin XLR DMX Connectors. Various built in programs can modes enable the unit to operate the LED RGB product using the on board display and menu selection buttons. Alternatively the unit can be connected to a remote DMX controller and then set to one of three DMX modes which enable the unit to run all the RGB outputs together, or alternatively each outputs to be accessed separately enabling the LED units to be zoned and controlled individually. With the flexibility of 12v or 24v operation this units can be used to run a variety of different LED units and can be operated in conjunction with the LED technologies RGB Amplifiers to run additional LED products. Specifications 12 x DMX Channels Power Input 12v & 24v DC Power Consumption: 200w Power Output: 12v & 24v (Dependant on input voltage) 4 x 4pin terminal sockets for LED Flex Features Powers and controls up to 4 x 5m lengths of 14.4w / metre RGB Flex Four Channel Zoning (DMX Mode 3) DMX 512 Controllable (Three Modes) DMX Linkable (3pin XLR) Stand Alone mode Master / Slave Operation Compatible with LED Technologies Easy Controller Built in adjustable programs for Colour Fade and Colour Chase Static Colour Selection with dimming LED digital interface and menu buttons for easy set up or operation

Manual.pdf Setup Schematic Options.pdf	RGB RF Remote Controller & RF Receiver Remote features are: Switch “on / off”, “Instant White“ or “Colour Mix Mode” selection, “Slow Colour Fade Program” select and full dimming in any mode. When in “Colour Mix” mode, simply run your finger around the “Touch Sensitive Colour Dial” to mix your own colour. The remote control unit allows full remote dimming in all modes and will remember the colour and light intensity selected if powered off. The RF Receiver is a compact unit which can be mounted discreetly to suite most installations. Specifications Remote Control Compact Ergonomic Design Power On / Off Button Instant “White” Select Button Brightness Control (All Modes) Variable Colour Select Disc Colour Fade Mode Specifications RF Receiver Input Voltage: DC 12v / 24v Output Voltage: DC 12v / 24v Power: 6A Output Control: Three Channel (RGB) Control Method: Common Anode Wireless Frequency: 433.92MHz

Manual.pdf	RGB Amplifier The RGB Amplifier is an In-Line Power / Signal Booster for the LED technologies ProFlex and LED Light Panel products. Connecting the RGB Amplifier to a suitable 24v Power Supply will enable multiple lengths of RGB ProFlex or multiple LED Light Panels to be linked together without the need for additional control boxes. Note: We recommend using LED Technologies Power Supplies for best results. Specifications Input: 24v DC Output: 24v DC Output Power: 4A Features Compact Design Enables LED Products to be Linked together Ideal for use with ProFlex and LED Light Panel System Compatible with LED Technologies LED Control system


	12v & 24v DC Power Supplies for LED Lighting Products These quality LED Power Supply Units are available in 12v or 24v DC with either 100w or 350w outputs, suitable for all types of Pro-Flex and LED light panel products. Simply connect to a suitable 240v Mains supply and connect your LED control equipment or single colour ribbon flex to the 12v or 24v output and the PSU will supply a constant stabilised power supply to your equipment. Specifications Input: 110v – 240v AC Output: 12v or 24v DC Power: 100w or 350w Dimensions: 215mm x 115mm x 50mm Weight: 1kg

LED RGB Strips

Touch Sensitive Colour Dial

Ribbon Overview

RGB Proflex is an impressively bright, colour changing LED lighting solution designed to give a smooth colour changing wash to areas where flexibility is the primary requirement. Ideal for installations, ProFlex can be cut and joined and is IP65 rated with a 3M sticky backing to fix to most surfaces. The Tri-Colour LED’s give smooth rich vibrant colour mixing and dimming from 0 - 100% with negligible drop out at 0%.

Specifications Ribbon

24v Power input to avoid voltage drop
60 x Tri-Colour LED’s / metre
14.4W light output / metre
Cutting / joining points every 10cm
Silicone coated for protection and IP65 rated for outdoor / indoor use
3M sticky backing
Flexible
Supplied in 5m rolls (Max Run Length 5m without RGB Amplifier)
Dimensions per roll 5mtr x 13mm x 3mm

Setup Schematic Options.pdf

Manual.pdf

LED (RGB) DMX Controller / Zoner

This superb LED RGB Controller / Zoner can control up to 20m of ProFlex or 6 X LED RGB Light Panels. The unit has a built in DMX Controller and can be linked together with other controllers using 3 pin XLR DMX Connectors.
Various built in programs can modes enable the unit to operate the LED RGB product using the on board display and menu selection buttons. Alternatively the unit can be connected to a remote DMX controller and then set to one of three DMX modes which enable the unit to run all the RGB outputs together, or alternatively each outputs to be accessed separately enabling the LED units to be zoned and controlled individually.
With the flexibility of 12v or 24v operation this units can be used to run a variety of different LED units and can be operated in conjunction with the LED technologies RGB Amplifiers to run additional LED products.

Specifications

12 x DMX Channels
Power Input 12v & 24v DC
Power Consumption: 200w
Power Output: 12v & 24v (Dependant on input voltage)
4 x 4pin terminal sockets for LED Flex

Features

Powers and controls up to 4 x 5m lengths of 14.4w / metre RGB Flex
Four Channel Zoning (DMX Mode 3)
DMX 512 Controllable (Three Modes)
DMX Linkable (3pin XLR)
Stand Alone mode
Master / Slave Operation
Compatible with LED Technologies Easy Controller
Built in adjustable programs for Colour Fade and Colour Chase
Static Colour Selection with dimming
LED digital interface and menu buttons for easy set up or operation

Manual.pdf

Setup Schematic Options.pdf

RGB RF Remote Controller & RF Receiver

Remote features are: Switch “on / off”, “Instant White“ or “Colour Mix Mode” selection, “Slow Colour Fade Program” select and full dimming in any mode. When in “Colour Mix” mode, simply run your finger around the “Touch Sensitive Colour Dial” to mix your own colour.

The remote control unit allows full remote dimming in all modes and will remember the colour and light intensity selected if powered off.

The RF Receiver is a compact unit which can be mounted discreetly to suite most installations.

Specifications Remote Control

Compact Ergonomic Design
Power On / Off Button
Instant “White” Select Button
Brightness Control (All Modes)
Variable Colour Select Disc
Colour Fade Mode

Specifications RF Receiver

Input Voltage: DC 12v / 24v
Output Voltage: DC 12v / 24v
Power: 6A
Output Control: Three Channel (RGB)
Control Method: Common Anode
Wireless Frequency: 433.92MHz

Manual.pdf

RGB Amplifier

The RGB Amplifier is an In-Line Power / Signal Booster for the LED technologies ProFlex and LED Light Panel products. Connecting the RGB Amplifier to a suitable 24v Power Supply will enable multiple lengths of RGB ProFlex or multiple LED Light Panels to be linked together without the need for additional control boxes.

Note: We recommend using LED Technologies Power Supplies for best results.

Specifications

Input: 24v DC
Output: 24v DC
Output Power: 4A

Features

Compact Design
Enables LED Products to be Linked together
Ideal for use with ProFlex and LED Light Panel System
Compatible with LED Technologies LED Control system

12v & 24v DC Power Supplies for LED Lighting Products

These quality LED Power Supply Units are available in 12v or 24v DC with either 100w or 350w outputs, suitable for all types of Pro-Flex and LED light panel products.

Simply connect to a suitable 240v Mains supply and connect your LED control equipment or single colour ribbon flex to the 12v or 24v output and the PSU will supply a constant stabilised power supply to your equipment.

Specifications

Input: 110v – 240v AC
Output: 12v or 24v DC
Power: 100w or 350w
Dimensions: 215mm x 115mm x 50mm
Weight: 1kg